74LVC1G07GW-Q100H

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Logic devices are ubiquitous in the modern computing and electronics industry. Among them, the 74LVC1G07GW-Q100H is a sophisticated one. It is a low-power, single-channel bus switch, with two select inputs and one enable input. This article aims to make a brief introduction of its application fields and working principle.

Application Field

74LVC1G07GW-Q100H is a low-power, single-channel logic switch designed for use in applications where the power consumption must be minimized. It has two select pins (S1 and S2) and one enable pin (EN), and it supports both positive-logic and negative-logic control. It is suitable for a wide range of applications, such as transmission media shared access systems, computer system busses, automatic test equipment, point-of-sale systems, medical and industrial control systems, communication networks, and mechatronics.

Working Principle

74LVC1G07GW-Q100H is basically a double 2-input multiplexer that is connected to two output buses, A and B. The select pins S1 and S2 and the enable pin EN control the logic switch. If EN is high, the logic switch will operate normally; if EN is low, the logic switch will be disabled and the output buses A and B will be isolated. For each select pin, when it is high, the logic switch is connected to output bus A; when it is low, the logic switch is connected to output bus B. In other words, if both S1 and S2 are high, the logic switch is wiring bus A to bus B; if one of S1 and S2 is low, the logic switch is wiring bus B to bus A; if both S1 and S2 are low, the logic switch is wiring bus A to itself.

Conclusion

To conclude, 74LVC1G07GW-Q100H is a low-power, single-channel logic switch designed for a wide variety of applications. It has two select pins and one enable pin, and it supports both positive-logic and negative-logic control. Its working principle is that when enabled, the logic switch is connected to two output buses according to the state of the select pins.

The specific data is subject to PDF, and the above content is for reference