74LVC1G17GM,132

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

74LVC1G17GM,132 is a logic buffer, driver, receiver, transceiver that is designed with the goal of providing isolation, signal translation, and noise immunity between two buses. The device is based on advanced CMOS technology and operates at low voltage levels to reduce power consumption. The device has a separate output port, allowing it to operate in two different modes, one as a buffer and the other as a transceiver. In the transceiver mode, the device can transmit and receive signals, providing isolation and a reliable data transfer.

Application Field

The 74LVC1G17GM,132 is mainly used in systems and applications where the condition of isolation is necessary between two different buses. It enables the communication between two buses with different logic levels and different voltages. This logic buffer can be used for a wide range of applications including embedded systems, automotive, industrial, high-speed applications, and so on. Since it has also a multi-voltage capability, the device could also be used with 5V, 3V, and 2V buses. Moreover, the LVTTL compatible inputs result in better performance when compared to other logic buffers.

Working Principle

The 74LVC1G17GM,132 is a 3-state buffer. It contains two outputs, an active low output (OE) and an active high output (IN). It has four logic input pins: A1, B1, C1 and D1. A1 and B1 are assigned for data gates and C1 and D1 for control gates. The active low output acts as a buffer and allows the device to be used as a two-state buffer. It is used to transfer information from one bus to the other.

When A1 and B1 are both low, the output is a logic ‘1’. When A1 is high and B1 is low, the output is ‘0’. When both A1 and B1 are high the output is in a tristate mode. When the output is in tristate mode, the signal present in the output is seen in the other side of the buffer. This allows the signal to cross from one bus to the other.

The active high output is used for the transceiver mode. When C1 and D1 are both high, the output is logic ‘1’. When C1 is low and D1 is high, the output is ‘0’. Also when both C1 and D1 are low, the output is in the tristate mode. This mode allows the signal to be transmitted from one bus to the other.

In summary, the74LVC1G17GM,132 is a low-voltage logic buffer, driver, receiver, transceiver. It is used for applications where isolation requirements are a priority. It enables communication between two buses with different logic and voltage levels. With the 2-state buffer and transceiver modes the device is able to perform well in a variety of applications.

The specific data is subject to PDF, and the above content is for reference