74LVC1G17GV-Q100,1

74LVC1G17GV-Q100 Logic - Buffers, Drivers, Receivers, Transceivers

74LVC1G17GV-Q100 is a low-voltage, single-supply, single-gate buffer with non-inverting logic and lower power consumption. This logic buffer can operate at supply voltages of 1.2 to 3.6 V, allowing it to be used in low voltage applications. It has an operating temperature range of -40 to +125 °C and it is available in a TSSOP package.

Application Field

This low voltage, single-supply buffer is well-suited for use in low voltage applications where its strengthened ESD protection, high-speed performance, and low power consumption capabilities offer an economical and reliable solution. 74LVC1G17GV-Q100 can be used in a variety of applications including digital logic interfaces between 1.2V and 3.6V powered devices, clock division and signal buffering in microcontroller-based systems, as well as buffering of address and data buses in memory systems.

Working Principle

74LVC1G17GV-Q100 is designed to work as a single non-inverting buffer with a logic-level input and a logic-level output, meaning that it will output the same logic-level as the logic-level that is given as the input. It has an active-low enable pin (EN) which allows the user to control the buffer\'s output. When EN is high, the output signal is in a high-impedance state, meaning that the signal is disconnected from the output. When EN is low, the output signal is equal to the input signal.

The logic-level input signal must be within the supply voltage range of the device in order for it to operate properly. The logic-level output signal is the same logic-level as the logic-level input signal, but with a slightly lower voltage. This is due to a voltage drop across the buffer, which is caused by the saturation of the internal transistor.

The maximum output current of the 74LVC1G17GV-Q100 is very low, as it is designed to drive only small capacitive loads. This means that it is not suitable for driving large capacitive loads or for use in other power-hungry applications.

Conclusion

74LVC1G17GV-Q100 is a low-voltage, single-supply, single-gate buffer with non-inverting logic and low power consumption. It can operate at supply voltages of 1.2 to 3.6V, allowing it to be used in low voltage applications and with devices from the same voltage range. It is suitable for use in applications such as clock division and signal buffering, digital logic interfaces, and buffering of address and data buses in memory systems.