74LVC2G74DP,125

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Logic-flip flops are long-term logic elements that are used to store binary data as either a 1 or a 0. The 74LVC2G74DP,125 is a dual D-Type flip flop device which has two separate data-inputs, set, reset and clock inputs. It is especially useful for data transfer or data synchronization applications where two separate logical functions must be performed in tandem. This particular device has an 8 pin package, making it compact and easy to use in a variety of applications.

The 74LVC2G74DP,125 utilises an edge-triggered flip-flop circuit, which means that it will only be activated in response to an edge (low-to-high or high-to-low) of its clock signal. When activated, the device will take the value of its two data-inputs and store it until it is again triggered by the edge of its clock signal. These two data-inputs are referred to as the D-inputs and are the primary means of manipulating the data that is stored by the device.

The other two inputs of the 74LVC2G74DP,125 are referred to as the S-input and R-input. These two inputs have a much lower effect on the state of the output, but are still considered important as they can place the flip-flop into a certain state before the edge of the clock signal is reached. The S-input will reset the output to a low (0) value, whilst the R-input will cause the output to enter a high (1) state. The actual value of the output when triggered will still be determined by the D-input values.

The 74LVC2G74DP,125 is especially useful for data transfer and synchronization applications due to its superb speed and low power requirements. This device also supports both positive and negative power supply voltages, making it useful in a variety of environments. The device is also available as a 100 kHz (speed grade) variant which is particularly useful where high speed performance is required.

The primary application field of the 74LVC2G74DP,125 is, as previously mentioned, data transfer and synchronization applications. This is due to the device’s ability to store two separate data-inputs, set, reset and clock inputs, which can then be used to synchronize multiple devices when necessary. The device is also often used in memory circuits such as registers, Counters and Arithmetic Logic Units (ALUs) due to its low power and speed requirements.

Overall, the 74LVC2G74DP,125 is a powerful, yet efficient dual D-Type flip flop device which is perfect for data transfer and synchronization applications. Due to its compact nature and low power requirements, this device is an ideal choice for a variety of applications, and its reliability and cost-effectiveness make it one of the most popular elements in modern circuit designs.

The specific data is subject to PDF, and the above content is for reference