74LVTH2245PW,118

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 74LVTH2245PW,118 is a part of the Logic - Buffers, Drivers, Receivers, Transceivers family, and is an octal non-inverting transceiver with tri-state outputs. With just one chip, it allows for up to eight buffers and drivers with both enable/disable and direction control functions.

The 74LVTH2245PW,118 operates from a single 3.0V to 3.6V supply. It has input logic levels that are compatible with TTL and CMOS signals, allowing for good interfacing with most logic systems. It also has low output-stage power dissipation, making it both efficient and cost-effective.

The 74LVTH2245PW,118 has a maximum rate of 25 Mhz, allowing it to handle relatively large amounts of data quickly. Its fan-out of 15 makes it capable of driving sizable loads, while its non-latching output enables/disables functionality, allows for bidirectional control, and reduces power consumption.

The 74LVTH2245PW,118 can be used to provide bidirectional data transfer over buses of one to eight data lines. It can also be used for digital-to-analog/analog-to-digital conversion as well as for serial-to-parallel or parallel-to-serial conversion. Additionally, it can be used to provide a port expansion by serially connecting two or more 74LVTH2245PW,118 chips together and controlling the direction of the bus.

The working principle of the 74LVTH2245PW,118 is simple. It consists of two logic circuits: a data buffer and a control logic circuit. The data buffer contains eight tri-state buffer/drivers, each of which has an output enable (OE) and an output control () pin. When OE is active (i.e. low) and is active (i.e. high) the buffer/driver enables the output of the corresponding data line. When OE is inactive (i.e. high) and is inactive (i.e. low) the buffer/driver disables the output of the corresponding data line.

The control logic circuit is responsible for controlling the direction of the data flow. It has two input pins (A and B), which are used to control the direction of the bus. When both pins are either low or high (allowing for three different logic combinations), the bus direction is set to input; when the combination of A and B is such that one of the two pins is high and one is low, the direction of the bus is set to output.

By controlling both the OE and pins, the 74LVTH2245PW,118 allows for bidirectional data transfer. It also enables/disables individual outputs as well as the entire port. This allows for a greater flexibility in system design, making it an ideal choice for many applications.

The specific data is subject to PDF, and the above content is for reference