74LVX174MTC

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 74LVX174MTC is a 16-pin, low-voltage Quad D-type flip-flop with 3-state outputs. It is an integrated circuit that can be used for various digital logic applications, ranging from data storage and joining to sequencing and data transmission. It utilizes Non-volatile Memory (NVM), allowing it to retain its volatile state during power cycling.

The main application field of the 74LVX174MTC is in data bus design applications and especially in clocking, as it is designed to facilitate efficient communication of data between multiple synchronous devices by synchronized and timed pulses of data. For example, the 74LVX174MTC can be used to transmit a clock signal from one source to multiple destinations, or the opposite - one source can be supplied with a single clock signal from multiple sources.

This flip-flop has essentially two operation modes. The first mode is the pass‑trough mode which allows the clock pulse to pass through the flip‑flop without any delay, as the data is only stored temporarily. The stopped mode allows the data to be held before it is output, whereby all the data is latched up and re-timed at the same time.

The 74LVX174MTC has three-state output control that allows it to interface multiple flip-flops together. The control signal can be controlled either by microprocessors or manually operated switches. The three-state controls make it possible to reduce the loading on other downstream chips and circuits, thus enabling the exact number of flip-flops to be used in a given circuit. To improve flexibility, data width expansion can also be performed by combining multiple flip-flops.

The 74LVX174MTC can operate with both latch and registered inputs. The registered outputs enable the data to be read at both the high and the low side of the signal; this improves signal integrity. The internal register allows the chip to hold the signal data until it is ready to be released from the state. The outputs are provided in a three-state non-inverting configuration, which allows multiple chips to use the same output pins without having to be connected together.

The 74LVX174MTC can also be used for asynchronous timing applications. In this case, the chip can be used with a clock to synchronize the input data, allowing the device to support different frequency ranges. Furthermore, the asynchronous interface will enable the chip to be used in a delay line application, where it can be used to create a delayed clock signal or delay between two data signals.

In summary, the 74LVX174MTC is a low-voltage Quad D-type flip-flop with 3-state outputs and Non-volatile Memory. It facilitates efficient communication of data between synchronous devices by synchronized and timed pulses, while also allowing data width expansion by combining multiple flip-flops. It is an ideal solution for data bus design applications, as well as for asynchronous timing applications.

The specific data is subject to PDF, and the above content is for reference