74LVX541MX

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 74LVX541MX is a part of the wide range of buffer and line driver lines from Texas Instruments. It provides three bidirectional logic level converters and has relatively high speed, enabling it to be used for multiple applications. As one of Texas Instrument’s Low Voltage logic devices, it offers high speed operation, low power consumption, and enhanced immunity to electro-static discharge, making it an ideal choice for high density consumer applications, including cell phones, digital TV, digital cameras, and camcorders.

The 74LVX541MX belongs to the Logic - Buffers, Drivers, Receivers, Transceivers category. Its main purpose is to increase the output drive capability and/or reduce the power consumption of a system. It can provide high current drive while operating at lower power, translating the digital input signals into the desired electrical levels. The buffer/driver can also be used to protect the input of the device from high speed signals and from any output with large capacitive loads.

The working principle of the 74LVX541MX is very simple: It receives an input signal, and then transforms it into a logic-level output signal. It does this either in open-drain mode (where only outputs of type 0 can be generated) or in push-pull mode (where both 0 and 1 outputs can be generated). The operating speed is typically up to 11 ns maximum propagation delay.

In open-drain mode, the device inputs a high level while the outputs are already at low level. This configuration is suitable for applications such as power control, where the input voltage is coming from a higher voltage bus and the output is managed to connect or disconnect the load to the power source. Then, the output can operate in either inverted or non-inverted mode, depending on the logic level of the input.

In push-pull mode, the device can either provide pull up or pull down output, depending on the logic level of the input. This configuration is suitable for applications such as data transmission, where the input voltage is coming from a lower voltage bus and the output must be converted to a higher voltage in order to be transmitted.

The 74LVX541MX offers typical output current values of 16 mA for TTL logic levels and up to 40 mA for CMOS logic levels. It also boasts low power dissipation levels of 3.2 mW for a 7.5 mA output current, making it an ideal choice for low power and high speed applications.

The 74LVX541MX is capable of operating in wide range of voltage levels, from 1.2 V to 3.6 V, making it suitable for low voltage designs. It is also very robust and It can withstand a voltage up to 4.5 V. The device also features a thermal shut down (TSD) so that it will protect itself in the event of an over-temperature situation.

Overall, the 74LVX541MX is a great device for handling high speed, low power logic-level conversion applications. Its features, including output current values and low power dissipation, makes it a great choice for many consumer applications, such as cell phones, digital TV, digital cameras and camcorders, among others.

The specific data is subject to PDF, and the above content is for reference