766163000XPTR7

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, Arrays, such as 766163000XPTR7, are components utilized to adjust percentages of impedance values in a variety of electrical circuitry. The concept of using a specific number of resistors to adjust impedance value of a certain circuit is called an attenuator. The higher the percentage of attenuation, the higher the resistance value required for the network.

The 766163000XPTR7 is a 4-resistor bi-directional attenuator. It consists of two 100Ω resistors and two 150Ω resistors connected in an H-sectional configuration. It is used to adjust the impedance of the circuit without affecting the signals. Typically, this resistor is used in broadcast and consumer electronics, but can be found in other application fields such as in aircraft, automobile, measuring device, etc.

The working principle of the 766163000XPTR7 design is based on the symmetrical voltage applied to the input leads. When both input leads have applied the same voltage at equal levels, the resistance in the resistor network can be adjusted to the desired level. This is known as an attenuator design. If the resistance is too low, the gain of the amplifier will be increased. If the resistance is too high, the gain of the amplifier will be reduced.

In order to achieve the desired results, the 766163000XPTR7 resistor network must be designed properly. The connection of the two resistors must be of a certain resistance magnitude in order to adjust the attenuator to the desired level. Generally, it is necessary to use a combination of resistors with the same resistance value, such as two 100Ω resistors and two 150Ω resistors. This is to ensure that the input signal is not affected by the resistor network when adjusting the impedance.

The 766163000XPTR7 is also used in consumer electronics such as cameras and various audio equipment. It is used to adjust the gain of the amplifier in the signal path. The gain of the amplifier can be changed by adjusting the impedance of the signal path. This involves connecting the two 100Ω and the two 150Ω resistors in different combinations in order to achieve the required gain for the signal path.

The 766163000XPTR7 is also used in many broadcast applications. This is because it can be used to adjust the signal ratio of the circuit. This is done by adjusting the impedance of the circuit. The signal ratio of the circuit is changed by changing the resistance value of the resistor network. This can be done by connecting the two 100Ω resistors and the two 150Ω resistors in different combinations.

In conclusion, the 766163000XPTR7 is a versatile resistor network that can be used in many application fields. Its symmetrical design provides an efficient tool for adjusting impedance levels without affecting the signal itself. Its resistance values can be adjusted to match the required gain for various applications. The 766163000XPTR7 is an ideal choice for any application requiring precise and reliable impedance control.

The specific data is subject to PDF, and the above content is for reference