768143105GP

Number of Pins:	14
Height - Seated (Max):	0.071" (1.80mm)
Size / Dimension:	0.390" L x 0.220" W (9.91mm x 5.59mm)
Supplier Device Package:	--
Package / Case:	14-SOIC (0.220", 5.59mm Width)
Mounting Type:	Surface Mount
Applications:	--
Operating Temperature:	-55°C ~ 125°C
Temperature Coefficient:	±100ppm/°C
Power Per Element:	200mW
Series:	768
Resistor-Ratio-Drift:	--
Resistor Matching Ratio:	--
Number of Resistors:	7
Tolerance:	±2%
Resistance (Ohms):	1M
Circuit Type:	Isolated
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, Arrays

Resistor networks and arrays are suitable for a wide variety of applications. They are often used for amplifiers, transducers, attenuators, filters, signal conditioning, and waveform snapshots, among other applications. The specific design of a resistor network depends on its application.A 768143105GP is an 8-pin network resistor package that is used for various applications. It is also referred to as the TL43CN7X, TL43TGX, GA63CN2X, NJK8X, NJK8XJ, NJK8XM7X, or SC1083P network resistor package. The TL43CN7X is a general-purpose, 8-pin network resistor package with between 3 and 8 pins, and it has a single wire-bond between each pin.The GA63CN2X is a 6-pin network resistor package with between 3 and 6 pins and two wire-bonds between each pin. It is used primarily for attenuators, filters, and signal conditioning circuits. The NJK8X, NJK8XJ, and NJK8XM7X are all 8-pin network resistor packages that are used for various power handling or protection circuits. Finally, the SC1083P is a 6-pin package with between 3 and 6 pins and three wire-bonds between each pin. This package is used primarily for high-power applications.Most of these resistor networks have a simple structure that consists of several resistors, in parallel or series, connected together. The values of the resistors will depend on the desired output. The physical layout of the resistors is also important to consider as it can affect the overall performance of the network.In general, these resistor networks are used to create specific voltage or current values by combining individual resistors into complex configurations. This allows the values of individual resistors to be adjusted, so the desired output is achievable.When designing a resistor network, the designer must consider both the resistors’ values and their arrangement in the network. This is done to ensure that the correct output is achieved. Depending on the application, there may be additional components that are required to be included in the network for optimal performance.Once the components are selected and configured in the network, the resistor network can be connected to the load. The voltage or current output is then checked to ensure that the desired values are achieved. Additionally, the durability of the network is also tested to confirm its maximum limit.In summary, the 768143105GP is a versatile network resistor package that is suitable for a wide variety of applications. While its specific design depends on its application, resistor networks are generally used to create specific voltage or current values with their individual resistors configured in complex configurations. The designer must consider the resistors’ values and their arrangement in the network to ensure they achieve the desired output. Once the network is connected to its load, the voltage or current output is checked and tested for durability.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description