![770-40 Allicdata Electronics](https://files.allicdata.com/upload/common/default.jpg)
Allicdata Part #: | 1949-1106-ND |
Manufacturer Part#: |
770-40 |
Price: | $ 0.69 |
Product Category: | RF/IF and RFID |
Manufacturer: | L3 Narda-MITEQ |
Short Description: | ATTENUATOR 0-1.8 GHZ TYPE N |
More Detail: | RF Attenuator 40dB 0Hz ~ 18GHz 100W Module |
DataSheet: | ![]() |
Quantity: | 2 |
1 +: | $ 0.63000 |
Specifications
Series: | 770 |
Packaging: | Box |
Part Status: | Active |
Attenuation Value: | 40dB |
Frequency Range: | 0Hz ~ 18GHz |
Power (Watts): | 100W |
Package / Case: | Module |
Description
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Attenuators
The 770-40 attenuator is a power control device used to reduce, or attenuate, the amplitude of a signal passing through it. It can also be used to provide impedance matching for different circuits. This type of device is used widely in different applications such as mobile phone base stations, professional audio systems, and test instrumentation. Its small size and low insertion loss make it ideal for these applications. This article will go over the 770-40 application field and working principle.
770-40 Application Field
The 770-40 is a low cost and reliable power control device that is ideal for a wide range of applications. It is typically used in mobile phone base stations, wireless systems, professional audio equipment, and test instrumentation. The device is mainly used for its low insertion loss performance, which can be up to 0.2 dB for a bandwidth of up to 4 GHz. It has low group delay variation with temperature variations, making it well suited for use in various systems.
Working Principle
The 770-40 attenuator consists of two variable resistors connected in series. The resistors can be continuously adjusted with a knob or by a voltage source. This is used to control the amount of power that passes through the network. The maximum attenuation that can be achieved is determined by the resistor values and the line impedance. The input and output signals can be considered as having a voltage relationship Vin/Vout = Rin/Rout, where Rin and Rout are the input and output resistors respectively.
In addition, the 770-40 attenuator can be used as an impedance matching device. This is achieved by adjusting the output resistor value until the desired impedance is achieved. This technique is often used to match different types of circuits which require different levels of impedance.
Conclusion
In conclusion, the 770-40 attenuator is a great choice for a wide range of applications. It has low insertion loss performance and is easy to use. It can also be used as an impedance matching device, which gives it a great deal of versatility. This article has covered the 770-40 application field and working principle.
The specific data is subject to PDF, and the above content is for reference
Latest Products
HMC939LP4E
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
![HMC939LP4E Allicdata Electronics](https://files.allicdata.com/upload/common/default.jpg)
ATT-0225-60-TNC-02
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
![ATT-0225-60-TNC-02 Allicdata Electronics](https://files.allicdata.com/upload/common/default.jpg)
M3933/17-09N
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
![M3933/17-09N Allicdata Electronics](https://files.allicdata.com/upload/common/default.jpg)
E-TA3216 T 2DB N6
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
![E-TA3216 T 2DB N6 Allicdata Electronics](https://files.allicdata.com/upload/common/default.jpg)
AT-206(40)
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
![AT-206(40) Allicdata Electronics](https://files.allicdata.com/upload/common/default.jpg)
ATT-0276-07-SMA-02
RF ATTENUATOR 7DB SMA MODULERF Attenuato...
![ATT-0276-07-SMA-02 Allicdata Electronics](https://files.allicdata.com/upload/common/default.jpg)