770101152

Number of Pins:	10
Height - Seated (Max):	0.195" (4.95mm)
Size / Dimension:	1.000" L x 0.098" W (25.40mm x 2.50mm)
Supplier Device Package:	10-SIP
Package / Case:	10-SIP
Mounting Type:	Through Hole
Applications:	--
Operating Temperature:	-55°C ~ 125°C
Temperature Coefficient:	±100ppm/°C
Power Per Element:	100mW
Series:	770
Resistor-Ratio-Drift:	--
Resistor Matching Ratio:	--
Number of Resistors:	9
Tolerance:	±2%
Resistance (Ohms):	1.5k
Circuit Type:	Bussed
Part Status:	Obsolete
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

：Resistor Networks, ArraysResistor networks, or resistor arrays, are a type of component widely used in the electronics industry. Generally, these components are made up of multiple resistors connected in a predetermined order or series with respect to each other. Depending on the number of resistors and their connections, these components can perform different tasks.The most basic type of resistor network is a single-turn resistance network. This is a series of resistors connected in a straight line. Each resistor in the network is connected to one of the opposite sides of the network, and the electrical current flows through each one in order. The total resistance of the network is calculated by adding all of the resistors together.Another type of resistor network is the parallel resistance network. This is where two or more resistors are connected parallel to each other. The total resistance of the network is calculated by taking the inverse of the sum of the resistances of all of the individual resistors. If any of the resistors in the network are shorted, the current will only flow through that particular resistor, resulting in a larger total resistance than in a single-turn resistance network.Another type of resistor network is a ladder network. This is a network composed of two or more parallel resistors connected in a ladder-like fashion. This type of network is often used to create an adjustable voltage divider, where the voltage can be divided by adjusting the position of the resistors.The most common type of resistor network is the Wheatstone bridge. This is a type of four-riveted network in which two fixed resistors and two variable resistors are connected together in a specific sequence. This type of network is used to measure a resistance that is too small to be measured directly. This is done by balancing the bridge. In this case, the total resistance in the circuit is unknown, and the two variable resistors must be adjusted in order to achieve a balanced bridge.No matter what type of resistor network is being used, the general principle is the same: the resistors must be connected in a predetermined sequence in order to achieve a certain goal. This could include balancing a bridge, creating a voltage divider, or simply calculating the total resistance of a network. Overall, resistor networks are a widely used and important component in the electronics industry.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description