77061222P

Number of Pins:	6
Height - Seated (Max):	0.195" (4.95mm)
Size / Dimension:	0.600" L x 0.098" W (15.24mm x 2.50mm)
Supplier Device Package:	6-SIP
Package / Case:	6-SIP
Mounting Type:	Through Hole
Applications:	--
Operating Temperature:	-55°C ~ 125°C
Temperature Coefficient:	±100ppm/°C
Power Per Element:	100mW
Series:	770
Resistor-Ratio-Drift:	--
Resistor Matching Ratio:	--
Number of Resistors:	5
Tolerance:	±2%
Resistance (Ohms):	2.2k
Circuit Type:	Bussed
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, Arrays

A 77061222P is a resistor network that is used in electronic circuits like smart phones, computers, printers, and other electronic devices. It consists of a combination of resistors and capacitors that are arranged in a particular manner. The main purpose of this network is to provide protection against electrical surges and other such problems that can occur in sensitive electronic circuits.The resistors are arranged in an array, so that they can be connected to each other in various ways. This arrangement helps to create different combinations of resistors that can be used to control the voltage or current levels within a circuit. The combination of resistors and capacitors also helps to reduce the noise levels within a circuit, as well as provide protection from electromagnetic interference.The working principle behind the 77061222P is based on the theory of electrostatics. This theory states that when electric charges are applied to a circuit, electrons will flow from the source to the load. This flow of electrons creates an electrical field that is proportional to the applied voltage. The resistors in the array will absorb this field and reduce the voltage levels, while the capacitors will store up the energy from the field and release it as needed.The resistors in the array can be arranged in any combination, depending on the desired voltage levels. They can be arranged in series, parallel, or in a combination of both. The resistors that are arranged in series will reduce the voltage levels across the entire array, while the ones that are in parallel will reduce the voltage only in certain parts of the array.Once the voltage levels have been reduced, it is then possible for the capacitors to store up the energy from the field and release it as needed. The capacitors must be chosen carefully, as they must be able to withstand the voltage levels that are applied to them. The capacitors can also be connected in series or in parallel, depending on the desired result.The 77061222P is an important component of many electronic circuits, as it provides protection from electrical surges and electromagnetic interference. It is also fairly easy to install, as it consists of just a few individual components that must be connected to each other in the right manner. With the right components and setup, it can be used to greatly reduce the amount of maintenance that is required for sensitive electronic circuits.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description