77063221

Number of Pins:	6
Height - Seated (Max):	0.195" (4.95mm)
Size / Dimension:	0.600" L x 0.098" W (15.24mm x 2.50mm)
Supplier Device Package:	6-SIP
Package / Case:	6-SIP
Mounting Type:	Through Hole
Applications:	--
Operating Temperature:	-55°C ~ 125°C
Temperature Coefficient:	±100ppm/°C
Power Per Element:	100mW
Series:	770
Resistor-Ratio-Drift:	--
Resistor Matching Ratio:	--
Number of Resistors:	3
Tolerance:	±2%
Resistance (Ohms):	220
Circuit Type:	Isolated
Part Status:	Obsolete
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, Arrays

Resistor networks and arrays are a type of electronics device used in many consumer, industrial and military applications to provide voltage stabilization and reduce noise. They are commonly used in computer and electronic circuits, as well as in power supplies, radio receivers and other applications.The most common type of resistor network is the 3-terminal version, which contains two resistors, three terminals, and a diode. The two resistors act to create a bridge network that is wired with the two terminals on each end of the bridge connected to both power and ground. The third terminal is connected to the middle of the bridge, providing the output voltage required for the circuit. The diode is used to create a buffer to reduce noise and voltage spikes that may occur.The two resistors in the 3-terminal version of the resistor networks provide a voltage divider effect. This means that the voltage input on one of the terminals will be divided by the resistance of the two resistors. This divided voltage can then be used to power the desired circuitry.The second type of resistor networks, and the most commonly used, is the 4-terminal version. This version consists of four resistors, four terminals, and a diode. The two terminals on each end of the resistor bridge are connected to both power and ground, while the other two are connected to their respective resistors.The four resistors in this particular version act as the voltage divider, where the voltage input on one of the terminals will be divided by the resistance of the four resistors. This divided voltage is then used to power the desired circuitry. The diode acts as a buffer to reduce noise and voltage spikes that may occur.Resistor networks and arrays can also be used in combination with other electronic components to produce highly complex circuits. For example, a complex circuit may be created using resistors in a voltage divider configuration, along with capacitors, diodes and transistors. In this case, the capacitors act as filters, removing noise and regulating the output voltage from the resistor bridge.Resistor networks and arrays are a very useful and versatile type of electronic device. They are used in countless applications, from consumer electronics to military applications. They are simple to use and require minimal setup, which makes them ideal for most applications where voltage regulation and noise reduction are necessary.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description