7709-6

Series:	Tri-Loc®
Packaging:	Bulk
Part Status:	Active
Adapter Type:	Plug to Plug
Conversion Type:	Same Series
Adapter Series:	Triaxial to Triaxial
Center Gender:	Male to Male
Convert From (Adapter End):	Triaxial Plug, Male Pin
Convert To (Adapter End):	Triaxial Plug, Male Pin
Impedance:	75 Ohm
Style:	Straight
Mounting Type:	Free Hanging (In-Line)
Mounting Feature:	--
Fastening Type:	Snap-On, Snap-On
Frequency - Max:	2.5GHz
Ingress Protection:	Weatherproof
Center Contact Plating:	Gold
Features:	--
Includes:	--
Body Material:	Brass
Body Finish:	Nickel
Center Contact Material:	Brass
Dielectric Material:	Polytetrafluoroethylene (PTFE)
Mating Cycles:	30000
Insertion Loss:	--
Operating Temperature:	-20°C ~ 70°C

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Coaxial connectors are devices used to provide a physical and electrical connection between two cables, and typically use a male end for the cable and a female end for the plug. The coaxial cable used for these connectors carries two signals, a signal and a ground, and is typically used for high-frequency applications. The 7709-6 coaxial connector is a type of RF adapter used in amateur radio applications, allowing for the connection of two radio receivers. In this article, we\'ll discuss the applications and working principle of the 7709-6.

Applications

The 7709-6 coaxial connector is typically used in amateur radio applications as an RF adapter connector. The female end is used to plug into the receiving end of a radio receiver and the male end is used to plug in the plug side of a coaxial cable. This allows two separate radios to be connected to each other for either communication or antenna-sharing, typically for shortwave and VHF transmissions.

Working Principle

The working principle of the 7709-6 is based on the coaxial connector\'s ability to transfer energy and signals between two separate cables, typically in the form of radio waves. The coaxial cable functions as a transmission line, with the coaxial connectors creating an electrical connection between the two cables. The 7709-6 connector is specifically designed for use with radio signals, as it is able to transfer large amounts of power without compromising signal integrity. When two radios are connected via the 7709-6, the signal is transmitted through the two cables and is received by both radios.

Conclusion

The 7709-6 coaxial connector is a type of RF adapter used in amateur radio applications. It is specifically designed to allow for the simple connection of two radio receivers, allowing for the sharing of antennas and communication between the two radios. The 7709-6 works on the principle of a transmission line, transferring energy and signals between two cables. With the 7709-6, users are able to easily connect two radio receivers and make use of the signals being transmitted.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description