77313-101-72

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Rectangular connectors headers and male pins can be used in a variety of applications, with 77393-101-72 being one such example. These components are used in electrical appliances, computer hardware, communication circuits, and other hardware applications. This component features two metal pins and an insulator between them, allowing for easier connecting and disconnecting of electronics. In addition, the pin spacing of this particular component conforms to a 2.54mm pitch.

The 77393-101-72 is designed with a plug-like shape, allowing it to be connected and disconnected quickly. This is extremely useful for connecting and disconnecting devices, such as when working with circuit test boards. With its two pins, it can also be used to transfer power, signal, and other electrical signals in a circuit. The insulation between the two pins prevents any short circuits that may occur.

As is common with all other rectangular connectors, the 77393-101-72 is easy to install and remove. To install the component, the pins need to be aligned with the correct socket on the target device. Once the pins are aligned, they can be inserted using either pressure or screwing. The pins then need to be properly tightened or secured into place. To remove the component, one can either unscrew or pull the pins depending on the type of fastening.

The 77393-101-72 is designed with a working principle based on the three states of electrical current – open, closed, and short. To understand this principle, one must first understand that electricity always tries to flow from a higher potential to a lower potential. When the two pins on the connector are in an open state – i.e., with no current flowing between them – no current is allowed to pass through, thus blocking the link between the two points. When the two pins are in a closed state – i.e., when a current is flowing between them – the connector acts like a bridge, allowing a precise level of electrical current to pass through.

When the two pins are in a short state – i.e., when they are directly connected – they act as a direct pathway, bypassing all other circuitry. This can result in current overload or even damage to the circuit, so this short state is only used in very specific circumstances during testing and maintenance of electronics.

The 77393–101-72 is a versatile connector capable of transferring power, signal, and data in electrical appliances. Its two pins feature insulation to prevent any short circuits, and it can be easily installed and removed. Furthermore, this component uses a three-state working principle, helping to prevent any accidents or damage during testing and maintenance.

The specific data is subject to PDF, and the above content is for reference