7843320150 Inductors, Coils, Chokes

Fixed Inductors

Fixed inductors, commonly referred to as inductors, are two-terminal passive components that store energy in the form of a magnetic field and are used to modulate the flow of AC or DC current. The part number 7843320150, commonly referred to as a “fixed inductor”, is specifically a ferrite wound inductor used for applications where a very high inductance is required. This article will discuss the application field and working principle of the 7843320150.

Application Field of 7843320150

The 7843320150 is used in a variety of applications due to its high inductance value, including power conversion applications, motor drive systems, switch mode power supplies, and noise mitigation circuits. Its high inductance makes it particularly suitable for applications where long cables are used, such as in CATV systems.

It is also often used in radio frequency (RF) applications such as radio receivers as it has the ability to suppress noise. As the impedance of the 7843320150 increases with frequency, it is also often used in a number of filter circuits. The 7843320150 is also widely used in electrical and electronics engineering, with a variety of applications in television aerial connections, measurement instrumentation, and electronic circuit noise reduction.

Working Principle of 7843320150

The working principle of a 7843320150 is based on the concept of inductance. Inductance is a measure of ability of a coil of wire to oppose a change in current. The more turns of wire there are in the coil, the higher the inductance. The 7843320150 is a high-inductance component, as it is made from a coil of ferrite material with numerous turns of wire.

In operation, the 7843320150 acts as a low pass filter. That is, when the signal passing through the inductor increases in frequency, the inductor will limit the rise of the signal as it passes through. This can be used to filter high frequency noise. The part also has a high current rating, which makes it suitable for high power applications.

In addition, the 7843320150 also acts as a transformer. When an alternating current passes through the inductor, a changing magnetic field is produced. This magnetic field produces an induced current, and this current can be used to power a separate circuit.

Conclusion

The 7843320150 is a ferrite wound inductor used in a variety of applications due to its high inductance rating. Its application field includes power conversion, motor drive systems, filter circuits, and noise mitigation. The 7843320150 works by opposing a change in current, producing an induced current, and acting as a low pass filter for high frequency noise. It is a useful component in a wide range of applications.