Allicdata Part #: | 7A-10.000MAAK-T-ND |
Manufacturer Part#: |
7A-10.000MAAK-T |
Price: | $ 0.29 |
Product Category: | Crystals, Oscillators, Resonators |
Manufacturer: | TXC Corporation |
Short Description: | CRYSTAL 10.000MHZ 20PF SMT |
More Detail: | 10MHz ±30ppm Crystal 20pF 80 Ohms 2-SMD, No Lead |
DataSheet: | 7A-10.000MAAK-T Datasheet/PDF |
Quantity: | 1000 |
1000 +: | $ 0.25988 |
Series: | 7A |
Packaging: | Tape & Reel (TR) |
Part Status: | Active |
Type: | MHz Crystal |
Frequency: | 10MHz |
Frequency Stability: | ±30ppm |
Frequency Tolerance: | ±30ppm |
Load Capacitance: | 20pF |
ESR (Equivalent Series Resistance): | 80 Ohms |
Operating Mode: | Fundamental |
Operating Temperature: | -20°C ~ 70°C |
Ratings: | -- |
Mounting Type: | Surface Mount |
Package / Case: | 2-SMD, No Lead |
Size / Dimension: | 0.197" L x 0.126" W (5.00mm x 3.20mm) |
Height - Seated (Max): | 0.053" (1.35mm) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Crystals: 7A-10000MAAK-T Application Field and Working Principle
Crystals are composed of quartz particles, several of which are piezoelectric. Crystals are commonly used for timekeeping and frequency control in electronic appliances. Among them, the 7A-10000MAAK-T crystal is a commonly used crystal with a relatively high frequency, which is widely used in many occasions. This article mainly introduces the application field and working principle of the 7A-10000MAAK-T crystal.
Application Field
The 7A-10000MAAK-T crystal is mainly used in the fields of multimedia communications, wireless communication, electronic engineering, electronic instruments, etc. It is mainly used in integrated circuit components, such as oscillators, filters, frequency dividers, transceivers, receivers, hand-held electronic equipment and audio equipment. Due to its high frequency, it is also suitable as an oscillator in microwave communication systems.
Working Principle
The 7A-10000MAAK-T crystal works on the principle of piezoelectric effect, which states that under the influence of mechanical stress, charge accumulation appears on the opposite sides of the piezoelectric material, and this charge accumulation is of the same polarity. When the mechanical stress is removed, electric current begins to flow between two opposite charges, producing electrical oscillations.
The 7A-10000MAAK-T crystal adopts a hermetically sealed package, which is an electric circuit composed of a crystal, two electrodes and a ground. A high frequency alternating voltage is applied to the electrode, inducing a periodic mechanical displacement in the quartz crystal. The induced mechanical displacement causes the crystal to vibrate at a certain frequency, producing high frequency electrical signals. This electrical signal is delivered as a clock or timing reference to the device connected to the crystal.
Conclusion
The 7A-10000MAAK-T crystal is a widely used crystal with a relatively high frequency. Its application fields include multimedia communications, wireless communication, electronic engineering, electronic instruments, etc. It works on the principle of piezoelectric effect, which is an electric circuit composed of a crystal, two electrodes and a ground. A high frequency alternating voltage is applied to the electrode, inducing a periodic mechanical displacement in the quartz crystal and producing electrical signals, which serves as a clock or timing reference.
The specific data is subject to PDF, and the above content is for reference
Crystal 8.59MHz 39pF 3-Pin CSMD T/R - Ta...
CRYSTAL 52.000 MHZ 12PF SMT52MHz 15ppm C...
CRYSTAL 50.000 MHZ 8PF SMT50MHz 15ppm Cr...
CRYSTAL 48.000 MHZ 8PF SMT48MHz 20ppm Cr...
CRYSTAL 44.000 MHZ 6PF SMT44MHz 20ppm Cr...
CRYSTAL 40.610 MHZ SERIES SMT40.61MHz 15...