Allicdata Part #: | 7A-16.000MAAK-T-ND |
Manufacturer Part#: |
7A-16.000MAAK-T |
Price: | $ 0.29 |
Product Category: | Crystals, Oscillators, Resonators |
Manufacturer: | TXC Corporation |
Short Description: | CRYSTAL 16.000MHZ 20PF SMD |
More Detail: | 16MHz ±30ppm Crystal 20pF 50 Ohms 2-SMD, No Lead |
DataSheet: | 7A-16.000MAAK-T Datasheet/PDF |
Quantity: | 1000 |
1000 +: | $ 0.25988 |
Series: | 7A |
Part Status: | Active |
Type: | MHz Crystal |
Frequency: | 16MHz |
Frequency Stability: | ±30ppm |
Frequency Tolerance: | ±30ppm |
Load Capacitance: | 20pF |
ESR (Equivalent Series Resistance): | 50 Ohms |
Operating Mode: | Fundamental |
Operating Temperature: | -20°C ~ 70°C |
Ratings: | -- |
Mounting Type: | Surface Mount |
Package / Case: | 2-SMD, No Lead |
Size / Dimension: | 0.197" L x 0.126" W (5.00mm x 3.20mm) |
Height - Seated (Max): | 0.053" (1.35mm) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Crystals have been used in various applications for centuries, primarily for their use in jewelry, religious artifacts, power sources, and electronics. The 7A-16.000MAAK-T crystals are one of the most common forms of crystals used in electronics today. These crystals are used in virtually every application where timing is critical, from radio and television receivers, to computers, to clocks and watches.
The 7A-16.000MAAK-T crystal is a type of quartz crystal. Quartz crystals are piezoelectric materials, meaning they generate an electric charge when put under pressure. This electric charge can then be used to control the frequency or timing of an electronic circuit. The 7A-16.000MAAK-T crystal is one of the most popular quartz crystal configurations because it is cost effective, reliable, and has a wide frequency range.
The 7A-16.000MAAK-T crystal is used in a wide variety of applications including frequency synthesizers, radio and television receivers, communication systems, telecommunications systems, and computers. In frequency synthesizers, the crystals are used as the local oscillator, generating a frequency that can be used to mix other frequencies for a desired output. In radio and television receivers, the crystal controls the oscillator, which in turn generates the intermediate frequency signals used for reception.
The 7A-16.000MAAK-T crystal is also used in communication systems, where the crystals are used to control the frequency of various audio samples in order to capture and reproduce them accurately. In telecommunications systems, the crystal is used to control the timing of phone calls and data transfers, allowing for reliable and speedy transmission of information. Finally, the 7A-16.000MAAK-T crystal is also used in computers, controlling the timing of memory access and data processing operations.
The working principle of the 7A-16.000MAAK-T crystal is relatively simple. When the crystal is put under pressure, it creates a voltage that changes periodically. This voltage can then be used to drive an oscillator circuit. The oscillator circuit creates an alternating current that is used to control the timing of a variety of electronic circuits. By controlling the frequency of the oscillator, the timing of the circuit can be precisely regulated.
The 7A-16.000MAAK-T crystal is a versatile and reliable component used in a wide range of applications. Its low cost, wide frequency range, and reliability make it one of the most popular crystals used in electronics today. The crystal’s simple working principle and its use in various application fields make it ideal for any project requiring precise timing.
The specific data is subject to PDF, and the above content is for reference
Crystal 8.59MHz 39pF 3-Pin CSMD T/R - Ta...
CRYSTAL 52.000 MHZ 12PF SMT52MHz 15ppm C...
CRYSTAL 50.000 MHZ 8PF SMT50MHz 15ppm Cr...
CRYSTAL 48.000 MHZ 8PF SMT48MHz 20ppm Cr...
CRYSTAL 44.000 MHZ 6PF SMT44MHz 20ppm Cr...
CRYSTAL 40.610 MHZ SERIES SMT40.61MHz 15...