7C-14.31818MDA-T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are electronic components that generate a periodic, or repetitive, electrical signal. They have a wide range of applications, from generating a clock signal for microprocessors to providing precise frequency control over a device.

7C-14.31818MDA-T oscillators are one of the most common types of oscillators used in various electronics devices. They are low-cost oscillators with high stability and high performance. They are ideal for use in consumer-level applications, where cost and reliability are key considerations.

The 7C-14.31818MDA-T oscillator consists of two sub-modules, the oscillator and the control circuit. The oscillator section consists of a quartz crystal, an internal electromagnetic coil, a capacitor, and an amplifier. The crystal generates a sine wave at a frequency determined by the crystal. The crystal frequency is then amplified by the amplifier and fed into the control circuit.

The control circuit is made up of a voltage-controlled oscillator (VCO) and a frequency divider. The VCO takes the amplified sine wave from the oscillator and converts it into a square wave at the desired frequency. The frequency divider is used to divide the square wave into two, creating the two square wave outputs, CLK and CLK#. These are then outputted from the oscillator.

Once the oscillator is configured, it can be used to drive a digital device such as a microcontroller or FPGA. In this case, the CLK output is fed to the device’s clock pin, while the CLK# output is connected to the device’s clock enable pin. This allows the device to be used as a timer and controlled by the oscillator.

The 7C-14.31818MDA-T oscillator is used in many applications, such as frequency control for radio transmitters, frequency synchronization in digital communications systems, and clock source for digital processors. It is also used for precise data transmission applications, such as in medical imaging and GPS. Its low-cost and high-performance make it one of the most popular oscillators for consumer electronics.

The specific data is subject to PDF, and the above content is for reference