7C-16.000MDA-T

Frequency Stability:	±25ppm
Current - Supply (Disable) (Max):	--
Height - Seated (Max):	0.055" (1.40mm)
Size / Dimension:	0.197" L x 0.126" W (5.00mm x 3.20mm)
Package / Case:	4-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	20mA
Operating Temperature:	-10°C ~ 70°C
Series:	7C
Voltage - Supply:	1.8V
Output:	CMOS
Function:	Enable/Disable
Frequency:	16MHz
Type:	XO (Standard)
Base Resonator:	Crystal
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The 7C-16.000MDA-T is a type of oscillator designed and manufactured by Abracon Corporation. This device is mainly used in a variety of applications such as telecommunications, medical diagnostic equipment, RF and microwave, automotive, and IoT. This article aims to discuss the application fields and working principles of the 7C-16.000MDA-T oscillator.

Application Fields

One of the main application fields of the 7C-16.000MDA-T oscillator is telecommunications. This device is a low noise, high performance oscillator that is ideal for implementing reference clocks used in 3G and 4G cellular networks. It has a low jitter performance of 0.10ps rms and can be used in applications requiring very low power consumption.The 7C-16.000MDA-T oscillator is also used in medical diagnostics equipment. This type of oscillator is capable of providing stable references clocks required in imaging equipment such as MRI systems, X-Ray machines, and Ultrasound systems, ensuring that the images produced are accurate and reliable.This device is also used in RF and microwave applications. It is an ideal choice for implementing frequency sources in applications ranging from general purpose frequencies to very high frequencies. This oscillator is suitable for operating at temperatures up to +125°C and can also be used in automotive applications.Finally, the 7C-16.000MDA-T oscillator is suitable for use in IoT applications. This type of oscillator is able to provide reference clocks for IoT devices, enabling them to send and receive data reliably.

Working Principle

The working principle of the 7C-16.000MDA-T oscillator is based on the generation of a sinusoidal signal. It utilizes a quartz crystal as the frequency reference, which is connected to an amplifier circuit. This amplifier circuit is designed to ensure that the output of the oscillator is a sinusoidal signal at the specified frequency. The 7C-16.000MDA-T oscillator also utilizes a feedback mechanism to ensure that the signal output is stable and in phase with the original input. This mechanism consists of a feedback loop comprised of two parts: a feedback resistor and a capacitor. The feedback resistor converts the actual output signal into a voltage, which is fed back into the amplifier circuit to correct any signal distortions. The capacitor then ensures that the phase between the input and output signal is correct by acting as a low pass filter.

Conclusion

In conclusion, the 7C-16.000MDA-T oscillator is a low noise, high performance device suitable for numerous applications. It has a wide range of applications, from the telecommunications industry to automotive and IoT applications. This type of oscillator is based on the principle of generating a sinusoidal signal, and utilizes a quartz crystal and a feedback loop mechanism to ensure that the output signal is stable and in phase with the input.

The specific data is subject to PDF, and the above content is for reference