7C-40.000MBB-T Crystals, Oscillators, Resonators

Frequency Stability:	±50ppm
Current - Supply (Disable) (Max):	--
Height - Seated (Max):	0.055" (1.40mm)
Size / Dimension:	0.197" L x 0.126" W (5.00mm x 3.20mm)
Package / Case:	4-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	30mA
Operating Temperature:	-10°C ~ 70°C
Series:	7C
Voltage - Supply:	3.3V
Output:	CMOS
Function:	Enable/Disable
Frequency:	40MHz
Type:	XO (Standard)
Base Resonator:	Crystal
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators

An oscillator is an electronic device that produces an oscillating signal, or a set of electrical signals that repeat at regular intervals. Oscillators are used in a number of electronic applications, such as radio transmitters, receivers, and amplifiers, to provide a steady signal that serves as a reference point for other components of the circuit. 7C-40.000MBB-T is an oscillator device that uses a programmable crystal oscillator as its main source of time-accurate signals. This oscillator is a low-cost, highly accurate solution that can be used for Frequency Synthesis, PLL Timing, Network Synchronization applications. The 7C-40.000MBB-T oscillator is based on the advanced 40.000MHz frequency technology. This oscillator adopts a specially designed crystal to achieve a frequency accuracy as low as ±20 ppm. The 7C-40.000MBB-T oscillator can be widely used in different applications. It can be used in Time Code receivers, GPS receivers, Positioning and Navigation Systems, Telecommunications systems, Network Synchronization Systems, Automatic Test Equipment, Accurate Wireless Synchronization, and more. It can also be used in Telemetry systems, Test and Measurement applications, and Synchronization of Multiple Sources.The working principle of the 7C-40.000MBB-T oscillator is relatively simple. The oscillator consists of a crystal and an oscillator circuit. When the crystal is excited by an electrical signal, it begins to vibrate at its resonant frequency. The vibration is then amplified by the oscillator circuit, which results in a steady, high-frequency signal. This signal is then used as the reference signal for the rest of the electronic circuit.The 7C-40.000MBB-T oscillator is a low-cost, highly accurate solution that can be used for a variety of applications. It features a frequency accuracy of ±20 ppb, and a stability of ±50 ppb over temperature and aging. It also features a very low jitter of 210fs between 50MHz and 100MHz frequencies. The main advantage of the 7C-40.000MBB-T oscillator is that it allows designers to have a precise and accurate timing reference for their electronic circuits, which in turn, leads to higher reliability and improved performance.

The specific data is subject to PDF, and the above content is for reference