7CZ-32.768KATF-T Allicdata Electronics
Allicdata Part #:

7CZ-32.768KATF-T-ND

Manufacturer Part#:

7CZ-32.768KATF-T

Price: $ 1.06
Product Category:

Crystals, Oscillators, Resonators

Manufacturer: TXC Corporation
Short Description: OSC XO 32.768KHZ CMOS SMD
More Detail: 32.768kHz XO (Standard) CMOS Oscillator 5V Enable/...
DataSheet: 7CZ-32.768KATF-T datasheet7CZ-32.768KATF-T Datasheet/PDF
Quantity: 1000
1000 +: $ 0.95918
Stock 1000Can Ship Immediately
$ 1.06
Specifications
Frequency Stability: ±25ppm
Current - Supply (Disable) (Max): --
Height - Seated (Max): 0.055" (1.40mm)
Size / Dimension: 0.197" L x 0.126" W (5.00mm x 3.20mm)
Package / Case: 4-SMD, No Lead
Mounting Type: Surface Mount
Ratings: --
Current - Supply (Max): 3mA
Operating Temperature: -40°C ~ 85°C
Series: 7CZ
Voltage - Supply: 5V
Output: CMOS
Function: Enable/Disable
Frequency: 32.768kHz
Type: XO (Standard)
Base Resonator: Crystal
Part Status: Active
Packaging: Tape & Reel (TR) 
Description

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

What is an Oscillator?

An oscillator is an electrical circuit or electronic component that creates a periodic, (usually Most waveforms such as square, sine, and triangle) oscillating signal, often for the purpose of providing an independent clock source for digital circuits. Oscillators are utilized in a number of different applications such as radio and television receivers and transmitters, computers, mobile phones, and remote control toys and other consumer electronics.

7CZ-32.768KATF-T Oscillator

The 7CZ-32.768KATF-T Oscillator is a low-cost, low-power device (available in an industry-standard 6-pin SOT-23 package) designed to provide a frequency-accurate timing reference to numerous microcontrollers, processors and systems.

Applications

The 7CZ-32.768KATF-T device is suitable for use in a variety of timing applications such as automotive radio, remote control toys, personal digital assistants (PDA), alarm clocks, and digital audio players. The quartz-based oscillator is particularly suitable for battery-powered devices due its low power consumption (<20μA).

Working Principle

The 7CZ-32.768KATF-T oscillator works by dividing a higher frequency signal down to the desired 32.768-kHz clock frequency. The oscillator is based on a quartz crystal, which creates an electromechanical vibration at its resonant frequency. This is then amplified and converted to a square wave signal at 32.768 kHz and fed into a counter, where it is divided down to a lower frequency. The output from the counter is then filtered and buffered to provide a clean and robust signal.

Conclusion

The 7CZ-32.768KATF-T oscillator is an ideal solution for designers looking for an accurate and reliable quartz-based oscillator. It is suitable for a wide range of applications, and features a low power consumption and low cost. The device\'s working principle is based on a quartz crystal oscillator, which provides a stable and reliable signal output.

The specific data is subject to PDF, and the above content is for reference

Latest Products
SIT8225AC-GF-18E-25.00120...

-20 TO 70C, 2520, 10PPM, 1.8V, 2Oscillat...

SIT8225AC-GF-18E-25.001200X Allicdata Electronics
SIT8225AC-GF-18E-25.00062...

-20 TO 70C, 2520, 10PPM, 1.8V, 2Oscillat...

SIT8225AC-GF-18E-25.000625X Allicdata Electronics
SIT8225AC-GF-18E-25.00000...

-20 TO 70C, 2520, 10PPM, 1.8V, 2Oscillat...

SIT8225AC-GF-18E-25.000000X Allicdata Electronics
SIT8225AC-2F-18E-25.00120...

-20 TO 70C, 3225, 10PPM, 1.8V, 2Oscillat...

SIT8225AC-2F-18E-25.001200X Allicdata Electronics
SIT8225AC-2F-18E-25.00062...

-20 TO 70C, 3225, 10PPM, 1.8V, 2Oscillat...

SIT8225AC-2F-18E-25.000625X Allicdata Electronics
SIT8225AC-2F-18E-25.00000...

-20 TO 70C, 3225, 10PPM, 1.8V, 2Oscillat...

SIT8225AC-2F-18E-25.000000X Allicdata Electronics