Allicdata Part #: | 887-1453-2-ND |
Manufacturer Part#: |
7M-10.000MAAJ-T |
Price: | $ 0.35 |
Product Category: | Crystals, Oscillators, Resonators |
Manufacturer: | TXC Corporation |
Short Description: | CRYSTAL 10.0000MHZ 18PF SMD |
More Detail: | 10MHz ±30ppm Crystal 18pF 100 Ohms 4-SMD, No Lead |
DataSheet: | 7M-10.000MAAJ-T Datasheet/PDF |
Quantity: | 3000 |
3000 +: | $ 0.31973 |
6000 +: | $ 0.30870 |
15000 +: | $ 0.29768 |
Series: | 7M |
Packaging: | Tape & Reel (TR) |
Part Status: | Active |
Type: | MHz Crystal |
Frequency: | 10MHz |
Frequency Stability: | ±30ppm |
Frequency Tolerance: | ±30ppm |
Load Capacitance: | 18pF |
ESR (Equivalent Series Resistance): | 100 Ohms |
Operating Mode: | Fundamental |
Operating Temperature: | -20°C ~ 70°C |
Ratings: | -- |
Mounting Type: | Surface Mount |
Package / Case: | 4-SMD, No Lead |
Size / Dimension: | 0.126" L x 0.098" W (3.20mm x 2.50mm) |
Height - Seated (Max): | 0.032" (0.80mm) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Crystals: 7M-10.000MAAJ-T application field and working principle
Crystals are a vital component of electronic circuits and have been used to achieve frequencies, filter signals, and invoke frequency stabilization. In this article we will go over the 7M-10.000MAAJ-T application field and working principle.
Application Field
When it comes to oscillator circuits, the 7M-10.000MAAJ series of crystals are ideal for applications in medical equipment and communication systems, as well as general telecommunication products. These crystals typically have a frequency range of 7 MHz to 10.000 MHz and offer a wide range of applications, including but not limited to: MCUs, modems, automotive, consumer electronics, and industrial applications. The 7M-10.000MAAJ series of crystals offers designers superior stability, performance, and a long life under varying operating conditions.
Working Principles
The 7M-10.000MAAJ series of crystals works similar to that of other oscillator crystals. At the core, a quartz crystal is used for oscillation and frequency control. This crystal typically consists of two elements connected in series. An alternating voltage, which can be adjusted to the desired frequency, is applied to one of the elements. The two crystals vibrate at the same frequency which is determined by the size, shape and material of the quartz crystal. These vibrations are then amplified and converted into an electrical signal. The signal is then outputted in a frequency-stable form that is either clock or sine-wave in nature.
In addition to the oscillation circuitry, the 7M-10.000MAAJ series of crystals also contains a temperature compensating circuit which helps keep the oscillation frequency consistent even under varying environmental conditions. This temperature compensation circuit helps in stabilizing the frequency of the signal when the temperature changes. This is important as any change in frequency can cause a disruption in the system or a deviation in signal output.
The 7M-10.000MAAJ series of crystals are a reliable and cost-effective solution for many of today’s communication and medical devices. They offer superior performance and long life even under varying operating conditions. With their high frequency range and temperature compensation circuit, designers can rest assured knowing their system will remain frequency-stable throughout its life.
The specific data is subject to PDF, and the above content is for reference
Crystal 8.59MHz 39pF 3-Pin CSMD T/R - Ta...
CRYSTAL 52.000 MHZ 12PF SMT52MHz 15ppm C...
CRYSTAL 50.000 MHZ 8PF SMT50MHz 15ppm Cr...
CRYSTAL 48.000 MHZ 8PF SMT48MHz 20ppm Cr...
CRYSTAL 44.000 MHZ 6PF SMT44MHz 20ppm Cr...
CRYSTAL 40.610 MHZ SERIES SMT40.61MHz 15...