7M-19.2000MAHL-T

Series:	7M
Part Status:	Active
Type:	MHz Crystal
Frequency:	19.2MHz
Frequency Stability:	±30ppm
Frequency Tolerance:	±30ppm
Load Capacitance:	22pF
ESR (Equivalent Series Resistance):	80 Ohms
Operating Mode:	Fundamental
Operating Temperature:	-40°C ~ 85°C
Ratings:	--
Mounting Type:	Surface Mount
Package / Case:	4-SMD, No Lead
Size / Dimension:	0.126" L x 0.098" W (3.20mm x 2.50mm)
Height - Seated (Max):	0.032" (0.80mm)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to the 7M-19.2000MAHL-T

The 7M-19.2000MAHL-T is a type of crystal device classified under the umbrella of Crystals. It is a precision quartz crystal oscillator with a tight frequency tolerance of +/- 0.25 ppm, and wide operating temperature range of -40 to +85 degrees Celsius. It is designed for applications which require high-frequency accuracy, reliable operation, and stability over a wide range of environmental conditions.

Applications of the 7M-19.2000MAHL-T

The 7M-19.2000MAHL-T is primarily used in timing and frequency-control applications, due to its precise and stable frequency output. It is commonly used in communication systems, industrial automation controllers, carrier frequency tracking, frequency synthesizers, embedded systems, and medical instrumentation. It is also often used in precision instrumentation and scientific test equipment, where precise timing and frequency are critical for precise and reliable data acquisition. In addition, its wide operating temperature range makes it suitable for use in rugged and demanding environments.

Working Principle of the 7M-19.2000MAHL-T

The 7M-19.2000MAHL-T is a quartz crystal device, based on the principle of the quartz crystal oscillator. Quartz is a type of piezoelectric crystal, which exhibits piezoelectric properties when a voltage is applied to it. This means that it changes its shape when a voltage is applied across it. The shape of the quartz crystal can be precisely controlled, and when a voltage is applied to it, its shape will rapidly change. The frequency of the oscillations produced by this rapid physical change is known as the resonant frequency of the crystal. In the 7M-19.2000MAHL-T, the resonant frequency is precisely tuned to a desired frequency, by carefully cutting the quartz crystal blank. The resonant frequency is very stable, and is largely unaffected by changes in temperature and other environmental conditions. The crystal oscillator is then connected to a suitable circuit in order to generate a precisely-controlled, consistent frequency output.

Conclusion

The 7M-19.2000MAHL-T is a reliable and precise quartz crystal oscillator, used in a wide range of timing and frequency-control applications. It offers a tight frequency tolerance of +/- 0.25 ppm and a wide operating temperature range of -40 to +85 degrees Celsius. Its working principle is based on the quartz crystal oscillator, in which the resonant frequency of the quartz crystal is precisely tuned to the desired frequency, and connected to a suitable circuit to generate a consistent frequency output.

The specific data is subject to PDF, and the above content is for reference