Allicdata Part #: | 7M-26.000MAHC-T-ND |
Manufacturer Part#: |
7M-26.000MAHC-T |
Price: | $ 0.29 |
Product Category: | Crystals, Oscillators, Resonators |
Manufacturer: | TXC Corporation |
Short Description: | CRYSTAL 26.000MHZ 9PF SMT |
More Detail: | 26MHz ±30ppm Crystal 9pF 60 Ohms 4-SMD, No Lead |
DataSheet: | 7M-26.000MAHC-T Datasheet/PDF |
Quantity: | 1000 |
3000 +: | $ 0.26263 |
Series: | 7M |
Packaging: | Tape & Reel (TR) |
Part Status: | Active |
Type: | MHz Crystal |
Frequency: | 26MHz |
Frequency Stability: | ±30ppm |
Frequency Tolerance: | ±30ppm |
Load Capacitance: | 9pF |
ESR (Equivalent Series Resistance): | 60 Ohms |
Operating Mode: | Fundamental |
Operating Temperature: | -40°C ~ 85°C |
Ratings: | -- |
Mounting Type: | Surface Mount |
Package / Case: | 4-SMD, No Lead |
Size / Dimension: | 0.126" L x 0.098" W (3.20mm x 2.50mm) |
Height - Seated (Max): | 0.032" (0.80mm) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Crystals are components of electronic circuits that are used to control the output of the circuits. The most commonly used crystal is the 7M-26.000MAHC-T crystal. This crystal has several applications and a unique working principle.
The 7M-26.000MAHC-T crystal can be used as a timing device, oscillator, filter and amplifier. As a timing device, the crystal works by using a combination of two quartz plates that vibrate at a specific frequency. This frequency is then transmitted to the connected circuit, allowing for precise timing of the circuit’s output. The crystal oscillator works by connecting two quartz plates in series and then providing an alternating current to these plates. The alternating current causes the quartz plates to vibrate at a specific frequency, thus providing an oscillating output.
As a filter and amplifier, the 7M-26.000MAHC-T crystal is used to filter and amplify signals in the electronics industry. It works by using two quartz plates that act as the filter. These two quartz plates are connected in parallel and then used to filter out unwanted signals from the main electrical signal. As an amplifier, the crystal is used to boost the voltage of the electrical signal. This is done by using two quartz plates that are connected in series and then used to generate a larger output voltage.
The working principle of the 7M-26.000MAHC-T crystal is based on the effect known as piezoelectricity. This effect can be described as the ability of certain materials to generate an electric charge when they are subjected to mechanical stress or pressure. This concept was first discovered by Jacques and Pierre Curie in 1880. When quartz is subjected to mechanical stress or pressure, it generates a current that can be detected by electronic components. This current can then be used to control the output of the connected circuit.
The 7M-26.000MAHC-T crystal is an extremely versatile component and can be used in a variety of applications, such as timing devices, oscillators, filters and amplifiers. It is also relatively small in size and can be easily integrated into a variety of circuits. The crystal’s working principle is based on the effect of piezoelectricity, which can be used to generate a current that can be used to control the output of circuits.
The specific data is subject to PDF, and the above content is for reference
Crystal 8.59MHz 39pF 3-Pin CSMD T/R - Ta...
CRYSTAL 52.000 MHZ 12PF SMT52MHz 15ppm C...
CRYSTAL 50.000 MHZ 8PF SMT50MHz 15ppm Cr...
CRYSTAL 48.000 MHZ 8PF SMT48MHz 20ppm Cr...
CRYSTAL 44.000 MHZ 6PF SMT44MHz 20ppm Cr...
CRYSTAL 40.610 MHZ SERIES SMT40.61MHz 15...