7M-27.120MAHE-T

Series:	7M
Packaging:	Tape & Reel (TR)
Part Status:	Active
Type:	MHz Crystal
Frequency:	27.12MHz
Frequency Stability:	±30ppm
Frequency Tolerance:	±30ppm
Load Capacitance:	12pF
ESR (Equivalent Series Resistance):	60 Ohms
Operating Mode:	Fundamental
Operating Temperature:	-40°C ~ 85°C
Ratings:	--
Mounting Type:	Surface Mount
Package / Case:	4-SMD, No Lead
Size / Dimension:	0.126" L x 0.098" W (3.20mm x 2.50mm)
Height - Seated (Max):	0.032" (0.80mm)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Crystals have been used in many everyday applications including electronics and clocks, but they can also have more specialized uses. One such specialized use is in the 7M-27.120MAHE-T Crystal Oscillator, which is used as a frequency generator in certain digital applications. This oscillator utilizes an AT-cut quartz crystal to generate a very precise frequency.In many digital applications, timing is critical and therefore the exact frequency output of an oscillator is important. The 7M-27.120MAHE-T is specifically designed to provide the accuracy and stability needed for these sensitive applications. It utilizes a tuned AT cut quartz crystal that produces frequency stability within 0.05 ppm over a wide range of temperature and operating voltage. This level of stability is far superior to other frequencies generators, such as LC or RC networks, which are limited by their lower accuracy and stability.The 7M-27.120MAHE-T is ideal for use with digital data systems, from embedded microprocessors to large data centers. It is small in size and requires minimal power, so it is a perfect choice for use in embedded microcontroller systems. It can also be used in rooms where vibration or electromagnetic interference (EMI) may cause problems with other frequency sources. The 7M-27.120MAHE-T works well in these noisy environments and can be relied upon to produce a precise frequency. The 7M-27.120MAHE-T works by using the AT-cut quartz crystal to convert an electrical signal into a mechanical wave of a precise frequency. This mechanical wave is then converted back into an electrical signal. By configuring the crystal oscillator carefully, the output frequency can be precisely tuned to a very exact level. This means that it can be tuned to a specific frequency for use in digital data systems or other applications that require an exact frequency.The 7M-27.120MAHE-T crystal oscillator is a very specialized device and is not suitable for use with all electronic applications. It is an expensive, reliable, and accurate device that requires a substantial amount of knowledge to use, install, and maintain. Despite this, it is an invaluable tool for electronics engineers as it can be used to generate an exact frequency in a wide range of applications.

The specific data is subject to PDF, and the above content is for reference