
Allicdata Part #: | 7M-31.875MBBK-T-ND |
Manufacturer Part#: |
7M-31.875MBBK-T |
Price: | $ 0.28 |
Product Category: | Crystals, Oscillators, Resonators |
Manufacturer: | TXC Corporation |
Short Description: | CRYSTAL 31.875MHZ 20PF SMD |
More Detail: | 31.8755MHz ±50ppm Crystal 20pF 60 Ohms 4-SMD, No L... |
DataSheet: | ![]() |
Quantity: | 1000 |
3000 +: | $ 0.25121 |
Series: | 7M |
Part Status: | Active |
Type: | MHz Crystal |
Frequency: | 31.8755MHz |
Frequency Stability: | ±50ppm |
Frequency Tolerance: | ±50ppm |
Load Capacitance: | 20pF |
ESR (Equivalent Series Resistance): | 60 Ohms |
Operating Mode: | Fundamental |
Operating Temperature: | -20°C ~ 70°C |
Ratings: | -- |
Mounting Type: | Surface Mount |
Package / Case: | 4-SMD, No Lead |
Size / Dimension: | 0.126" L x 0.098" W (3.20mm x 2.50mm) |
Height - Seated (Max): | 0.032" (0.80mm) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Crystals are widely used as essential components in modern electronic devices as they provide accurate frequency selection and stabilization. Typical crystal applications include oscillators, filters and transducers. Out of many crystal types, 7M-31.875 MBBK-T (multi-band ceramic filter with temperature compensated load capacitance) is the crystal of choice for many modern electronic applications.
This type of crystal has five parameters that must be considered when selecting a crystal for a specific application. The parameters are resonance frequency, load capacitance, motional capacitance, motional inductance and quality factor. These parameters must be carefully chosen to optimize the design of the circuit.
The most common application of 7M-31.875MBBK-T crystal is as a bandpass filter in mobile telecommunication equipment. It is used to filter out unwanted signals and frequencies, thus providing a clearer signal in the desired frequency range. The crystal itself is constructed of two electrically connected discs which are separated by a small distance, creating a resonant circuit. This resonant circuit enables the crystal to reject signals of the wrong frequency and pass signals of the desired frequency. The use of a 7M-31.875 MBBK-T filter in a mobile device helps to reduce electromagnetic interference, an important factor in the quality of the mobile signal.
The 7M-31.875 MBBK-T crystal also has the unique feature of temperature-compensated load capacitance, which helps to reduce the effects of temperature variations on the resonance frequency. This helps to stabilise the frequency over a range of temperatures, allowing for greater accuracy in the desired frequency range.
The design and implementation of the 7M-31.875 MBBK-T crystal in a device can vary greatly depending on the requirements of the application. For example, the crystal may be used as part of a receiver, a filter, an oscillator, or as part of a transducer. Each application may require different tolerances and parameters to ensure the best results, and should be carefully designed to optimise the performance of the device.
In summary, 7M-31.875 MBBK-T crystal is a wide-band ceramic filter with temperature-compensated load capacitance, which is used for a variety of applications in electronics. The crystal has a wide range of parameters which must be carefully chosen in order to optimise the performance of the circuit, and can be used in a wide variety of applications depending on the design requirements.
The specific data is subject to PDF, and the above content is for reference
Crystal 8.59MHz 39pF 3-Pin CSMD T/R - Ta...

CRYSTAL 52.000 MHZ 12PF SMT52MHz 15ppm C...

CRYSTAL 50.000 MHZ 8PF SMT50MHz 15ppm Cr...

CRYSTAL 48.000 MHZ 8PF SMT48MHz 20ppm Cr...

CRYSTAL 44.000 MHZ 6PF SMT44MHz 20ppm Cr...

CRYSTAL 40.610 MHZ SERIES SMT40.61MHz 15...
