7Q-40.000MBS-T Crystals, Oscillators, Resonators

Absolute Pull Range (APR):	--
Current - Supply (Disable) (Max):	--
Height - Seated (Max):	0.043" (1.10mm)
Size / Dimension:	0.126" L x 0.098" W (3.20mm x 2.50mm)
Package / Case:	4-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	2mA
Operating Temperature:	-30°C ~ 85°C
Series:	7Q
Frequency Stability:	±2ppm
Voltage - Supply:	3.3V
Output:	Clipped Sine Wave
Function:	--
Frequency:	40MHz
Type:	VCTCXO
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

7Q-40.000MBS-T Oscillators

Oscillators are electronic components that generate periodic waveforms, often used in clocks, radios, signal processing and other applications. One particular oscillator design is the 7Q-40.000MBS-T that is used in various technologies, including radio transmission, broadcast systems and sound card applications. This article explores the application field and working principle of 7Q-40.000MBS-T.

Application Field of 7Q-40.000MBS-T

The 7Q-40.000MBS-T oscillator is typically used in radio transmission and broadcast systems, where signals must be moved from one point to another without any time delay or distortion. It can also be used in sound cards, as it can generate audio signals that are sent to the speakers. These signals are generated by a quartz crystal which is tuned to the desired frequency.The 7Q-40.000MBS-T oscillator is also used in other applications, such as timers and digital clocks. Additionally, it is used in embedded systems to provide accurate clock signals and frequency stability for microcontrollers.

Working Principle of 7Q-40.000MBS-T

The 7Q-40.000MBS-T oscillator is based on the “inverse feedback” principle. This principle is based on the fact that electromagnetic waveforms travel through a medium, such as air or a conductive material, in opposite directions.By applying an electrical signal to the oscillator, the signal is sent through the medium and is reflected back. This process continues and the waveforms generated are amplified each time, enabling the oscillator to reach high frequencies quickly.The 7Q-40.000MBS-T oscillator uses a quartz crystal as the resonating element. The crystal is precisely machined to measure precisely 40MHz and is made from a special combination of two elements, silicon and germanium. The crystal is placed into the oscillator cavity and is wired to a power source. The crystal vibrates at a very precise frequency, which is determined by the design of the oscillator itself.

Conclusion

The 7Q-40.000MBS-T oscillator is a special type of oscillator used in various electronics and broadcast systems. It works by using inverse feedback, with the signal being bounced back and forth off a quartz crystal at a precise frequency. It can be used in applications such as radio transmission, timing, digital clocks and sound cards, among others.

The specific data is subject to PDF, and the above content is for reference