Allicdata Part #: | 7V-25.000MAHQ-T-ND |
Manufacturer Part#: |
7V-25.000MAHQ-T |
Price: | $ 0.32 |
Product Category: | Crystals, Oscillators, Resonators |
Manufacturer: | TXC Corporation |
Short Description: | CRYSTAL 25.000MHZ 10PF SMT |
More Detail: | 25MHz ±30ppm Crystal 10pF 60 Ohms 4-SMD, No Lead |
DataSheet: | 7V-25.000MAHQ-T Datasheet/PDF |
Quantity: | 1000 |
3000 +: | $ 0.28547 |
Series: | 7V |
Packaging: | Tape & Reel (TR) |
Part Status: | Active |
Type: | MHz Crystal |
Frequency: | 25MHz |
Frequency Stability: | ±30ppm |
Frequency Tolerance: | ±30ppm |
Load Capacitance: | 10pF |
ESR (Equivalent Series Resistance): | 60 Ohms |
Operating Mode: | Fundamental |
Operating Temperature: | -40°C ~ 85°C |
Ratings: | -- |
Package / Case: | 4-SMD, No Lead |
Size / Dimension: | 0.126" L x 0.098" W (3.20mm x 2.50mm) |
Height - Seated (Max): | 0.035" (0.90mm) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Crystals
Crystals are solid components used for generating a reference frequency for virtually any electrical device. They can be used in a variety of different types of devices to produce an accurate, consistent and reliable frequency. A 7V-25.000MAHQ-T crystal is a type of crystal oscillator typically used in LEDs, LCDs, RF receivers, and embedded systems. This type of crystal combines high frequency stability, high reliability and low power consumption.
Application Field
7V-25.000MAHQ-T crystals are primarily used in LED display and LED lighting applications. They are capable of providing an extremely accurate and consistent clock signal, ensuring precise timing of display data and improved reliability of LED displays. They can also be used in RF receiver circuits, to accurately and precisely receive radio frequency signals. Additionally, they are often used in embedded systems that require a precise timing signal. Some of the applications include digital cameras, network devices, control systems and communication systems.
Working Principle
7V-25.000MAHQ-T crystals operate based on the phenomenon of piezoelectricity. Piezoelectricity is a property of certain materials, such as quartz, where an electrical voltage is produced in response to physical strain or stress. A 7V-25.000MAHQ-T crystal consists of two electrodes on the two opposite surfaces of a piece of quartz crystal. When an alternating voltage is applied across the electrodes, the quartz crystal is mechanically stressed. As it is strained, it produces an electrical signal with the same frequency as the applied voltage. This electrical signal is then amplified, filtered and used as the timing reference for the device.
Conclusion
7V-25.000MAHQ-T crystals are commonly used in LED display and LED lighting circuits. They are capable of providing a very precise and reliable clock signal, ensuring accurate timing of display data and improved reliability of LED displays. They can also be used in RF receivers, embedded systems and other devices that require a precise timing signal. The crystals rely on the phenomenon of piezoelectricity, where they produce an electrical voltage in response to mechanical strain or stress.
The specific data is subject to PDF, and the above content is for reference
Crystal 8.59MHz 39pF 3-Pin CSMD T/R - Ta...
CRYSTAL 52.000 MHZ 12PF SMT52MHz 15ppm C...
CRYSTAL 50.000 MHZ 8PF SMT50MHz 15ppm Cr...
CRYSTAL 48.000 MHZ 8PF SMT48MHz 20ppm Cr...
CRYSTAL 44.000 MHZ 6PF SMT44MHz 20ppm Cr...
CRYSTAL 40.610 MHZ SERIES SMT40.61MHz 15...