7V-27.120MAHE-T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Crystals are used in a variety of applications, ranging from macroscopic timing devices to microscopic chemical sensors. A 7V-27.120MAHE-T crystal is a high-frequency oscillator commonly used to provide a calibration signal or “time-base” in high frequency circuits. The crystal oscillates at a very precise frequency and is used in a wide variety of applications from communication systems to medical imaging.

The 7V-27.120MAHE-T crystal is a silicon based crystal with a built-in cut piezoelectric crystal with a frequency of 27.120 kHz. The cut crystal consists of two faces that are technologically bonded and fitted in their slots. The frequency of the crystal is determined by the size, shape, and the material chosen for the crystal and the cut. The cut of the crystal is designed to provide maximum stability and a clean frequency.

The 7V-27.120MAHE-T crystal is typically used in applications where precision timing is required such as frequency division and digital-to-analog conversion. In frequency division, the crystal oscillates at a frequency higher than that of the desired output frequency. The output frequency is determined by dividing the crystal\'s frequency by a factor, which can be either digital or analog. Digital division is done using a digital counter, while analog division is done using an analog divider.

In digital-to-analog conversion, the 7V-27.120MAHE-T crystal\'s frequency is used to generate an analog voltage that is proportional to the input frequency. The output voltage is determined by dividing the crystal\'s frequency by a factor. This method ensures that the output voltage is maintained at a certain level regardless of the frequency of the input.

The 7V-27.120MAHE-T crystal also has applications in radio frequency circuits. It is used to create sinusoidal oscillations and produce a high frequency carrier wave. It can also be used to generate complex modulation signals. The crystal can be used as an oscillator for frequency division multiplexing (FDM), so that multiple signals can be transmitted simultaneously.

The 7V-27.120MAHE-T crystal is also used in medical imaging. It can be used to generate electrical signals which can then be used to create a three-dimensional image of the patient\'s organs. It is also used to generate ultrasound pulses, which can be used to measure the distances between objects in the imaging space.

The 7V-27.120MAHE-T crystal is a versatile and precision device that has a wide variety of applications. It is used in high-frequency circuits, digital-to-analog converters, frequency division, radio frequency circuits, and medical imaging. It is an essential component in numerous electronic systems, and its precision timing and stable operating frequencies make it well suited for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference