| Allicdata Part #: | 7V-27.120MEEQ-T-ND |
| Manufacturer Part#: |
7V-27.120MEEQ-T |
| Price: | $ 0.32 |
| Product Category: | Crystals, Oscillators, Resonators |
| Manufacturer: | TXC Corporation |
| Short Description: | CRYSTAL 27.120MHZ 10PF SMD |
| More Detail: | 27.12MHz ±10ppm Crystal 10pF 60 Ohms 4-SMD, No Lea... |
| DataSheet: |  7V-27.120MEEQ-T Datasheet/PDF |
| Quantity: | 1000 |
| 3000 +: | $ 0.28547 |
| Series: | 7V |
| Part Status: | Active |
| Type: | MHz Crystal |
| Frequency: | 27.12MHz |
| Frequency Stability: | ±10ppm |
| Frequency Tolerance: | ±10ppm |
| Load Capacitance: | 10pF |
| ESR (Equivalent Series Resistance): | 60 Ohms |
| Operating Mode: | Fundamental |
| Operating Temperature: | -20°C ~ 70°C |
| Ratings: | -- |
| Mounting Type: | Surface Mount |
| Package / Case: | 4-SMD, No Lead |
| Size / Dimension: | 0.126" L x 0.098" W (3.20mm x 2.50mm) |
| Height - Seated (Max): | 0.035" (0.90mm) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Crystals are an important component of electronic components and are widely used for various electronic applications. The 7V-27.120MEEQ-T crystal is one of the most commonly used crystals for various applications. It is used primarily in oscillators and amplifiers, providing precise frequency control.
The 7V-27.120MEEQ-T crystal typically consists of two electrodes made of special low-loss material and two metal rods, which are held at two opposite sides of a quartz crystal in an epoxy potting compound. The electrodes can be connected to external circuits with solder pins or wires. The two electrodes are coupled in series with a precise impedance. This small crystal unit is packaged in a container that is hermetically-sealed to protect the device against air, moisture and other environment.
The main application fields of the 7V-27.120MEEQ-T device is to frequency control of oscillators and amplifiers. An oscillator is a device which produces a periodic output signal, usually sinusoidal, of a precise frequency. An amplifier is a circuit which provides extra power to the electrical signal. By using the 7V-27.120MEEQ-T device, the frequency of the output signal can be precisely controlled as per operational requirements. It is also used to stabilize the frequency of oscillators and amplifiers.
The operating principle of the 7V-27.120MEEQ-T device is based on the natural resonance frequency of quartz. When an electric field is applied to the crystal, it causes the crystal to vibrate at its natural resonance frequency. This vibration is then used to drive the external circuits. As a result, the frequency of the signal is accurately tuned to the desired frequency without the need of any external frequency control.
The 7V-27.120MEEQ-T device is highly reliable as it comes in a hermetically sealed package and requires minimal external circuitry for operation. Additionally, it can be easily integrated into existing systems without making any major changes to the circuitry. It is used in a number of consumer electronics, industrial machinery, and scientific instruments due to its simple operation and high precision.
The specific data is subject to PDF, and the above content is for reference
Crystal 8.59MHz 39pF 3-Pin CSMD T/R - Ta...
CRYSTAL 52.000 MHZ 12PF SMT52MHz 15ppm C...
CRYSTAL 50.000 MHZ 8PF SMT50MHz 15ppm Cr...
CRYSTAL 48.000 MHZ 8PF SMT48MHz 20ppm Cr...
CRYSTAL 44.000 MHZ 6PF SMT44MHz 20ppm Cr...
CRYSTAL 40.610 MHZ SERIES SMT40.61MHz 15...