Allicdata Part #: | 7V-30.000MAHV-T-ND |
Manufacturer Part#: |
7V-30.000MAHV-T |
Price: | $ 0.32 |
Product Category: | Crystals, Oscillators, Resonators |
Manufacturer: | TXC Corporation |
Short Description: | CRYSTAL 30.000MHZ 8PF SMT |
More Detail: | 30MHz ±30ppm Crystal 8pF 60 Ohms 4-SMD, No Lead |
DataSheet: | 7V-30.000MAHV-T Datasheet/PDF |
Quantity: | 1000 |
3000 +: | $ 0.28547 |
Series: | 7V |
Packaging: | Tape & Reel (TR) |
Part Status: | Active |
Type: | MHz Crystal |
Frequency: | 30MHz |
Frequency Stability: | ±30ppm |
Frequency Tolerance: | ±30ppm |
Load Capacitance: | 8pF |
ESR (Equivalent Series Resistance): | 60 Ohms |
Operating Mode: | Fundamental |
Operating Temperature: | -40°C ~ 85°C |
Ratings: | -- |
Package / Case: | 4-SMD, No Lead |
Size / Dimension: | 0.126" L x 0.098" W (3.20mm x 2.50mm) |
Height - Seated (Max): | 0.035" (0.90mm) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Crystals have been used for thousands of years in various applications. Today, they are used in a variety of applications, including radio, communications and electronics. One such application is the use of 7V-30.000MAHV-T crystals in a variety of applications. These crystals are used to produce frequency-stable signals, which are important for communication, timing and electronic systems.
A 7V-30.000MAHV-T crystal is a piezoelectric crystal, which is a type of crystal that produces an electrical current when subjected to mechanical strain. The crystal is made of a specific quartz and has a specific resonance frequency, which is the frequency at which the crystal produces a more stable signal. When the crystal receives an alternating voltage, it vibrates at its resonant frequency and produces a sine wave of a fixed frequency.
The 7V-30.000MAHV-T crystal is commonly used in radio receivers, transceivers, and other communication devices. It is also used in applications such as timing circuits in computers, frequency calibration of oscillators, and pulse width modulation. The crystal can be used to stabilize the frequency of a signal and ensure that it remains constant over time. Furthermore, it is used to eliminate drift in frequency and keep signals within a narrow band.
The working principle behind a 7V-30.000MAHV-T crystal is based on the piezoelectric effect. This effect occurs when mechanical stress is applied to a crystal, causing it to generate an electric charge. This electric charge causes a voltage to be applied across the crystal, which causes it to vibrate at its resonant frequency. This vibration then creates a sine wave of a specific frequency, which is the frequency of the signal.
The 7V-30.000MAHV-T crystal is highly reliable and stable, making it suitable for use in a variety of communication and timing applications. It provides a cost-effective solution for providing stable frequencies in a variety of applications. The crystal is also easy to install and maintain, making it an ideal choice for use in a wide range of applications.
In conclusion, the 7V-30.000MAHV-T crystal is an important component in a variety of communication and electronics applications. It is used to produce stable and reliable frequency signals that are essential for communication, timing, and a variety of other applications. The crystal is highly reliable and easily installed, making it an ideal choice for a variety of applications.
The specific data is subject to PDF, and the above content is for reference
Crystal 8.59MHz 39pF 3-Pin CSMD T/R - Ta...
CRYSTAL 52.000 MHZ 12PF SMT52MHz 15ppm C...
CRYSTAL 50.000 MHZ 8PF SMT50MHz 15ppm Cr...
CRYSTAL 48.000 MHZ 8PF SMT48MHz 20ppm Cr...
CRYSTAL 44.000 MHZ 6PF SMT44MHz 20ppm Cr...
CRYSTAL 40.610 MHZ SERIES SMT40.61MHz 15...