7X-22.5792MBD-T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are essential electronic components which generate periodic waveforms at a given frequency, and are used in a wide variety of applications for signal generation, modulation and noise reduction. They are used to control radio frequency transmitters and receivers, circuits for synchronizing pulses in logic operations, as triggers for timing circuits, and in automotive and industrial applications. A common oscillator used in these applications is the 7X-22.5792MBD-T, which provides a simple and cost-effective solution for signal generation and synchronization.

The 7X-22.5792MBD-T is a quartz-based oscillator. It is designed to operate at a fixed frequency of 22.5792 MHz, with a maximum frequency deviation of ±50 ppm in the extended industrial temperature range of -40°C to +105°C. It is powered by a 3.3 or 5 V supply, and has a low current draw of up to 6 mA. It has a compact footprint with a footprint of 7 mm x 5 mm x 1.6 mm, and is available in a range of package configurations.

The 7X-22.5792MBD-T provides a robust and reliable solution for frequency control. The device is designed to be highly accurate and stable, and is protected against most common environmental conditions. It is also immune to destructive interference. Its low power requirements make it suitable for battery-powered and energy-efficient applications. Additionally, the device has a very low jitter of +/- 50ps for precise frequency control and synchronization.

The 7X-22.5792MBD-T is used in a variety of applications including automotive and industrial control systems, communication systems, medical devices, digital processing systems, data acquisition systems, and instrumentation. It is also widely used in consumer electronics such as television and audio equipment, radios and satellite receivers. The device is suitable for both fixed and portable applications, and is available in a range of configurations to allow for a variety of applications.

The 7X-22.5792MBD-T works by converting the electrical signal from the input circuit into an oscillating signal. The input circuit is typically a crystal quartz oscillator, which is connected to the control terminals of the oscillator. When a voltage is applied to the control terminals, the quartz crystal begins to oscillate, producing an alternating signal at the output. The frequency of this signal is stable, within the specified limit of ±50ppm, and is determined by the frequency of the crystal.

The 7X-22.5792MBD-T is a compact, accurate and reliable oscillator, capable of providing stable frequency signals for a range of applications. It is easy to use and is available in a range of configurations, providing a cost-effective and versatile solution for signal generation and synchronization.

The specific data is subject to PDF, and the above content is for reference