8-1393817-4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A signal relay is an electrically operated switch that is used to control electric circuits. Signal relays 8-1393817-4 are designed for connecting and disconnecting circuits at specified conditions and used in devices such as alarms, sensors, and other automated control systems. The 8-1393817-4 relay, with an AC or DC operating voltage of up to 2 amps, is used in a variety of applications.

Applications of 8-1393817-4 Relays

The 8-1393817-4 signal relay is used whenever a low voltage power source, such as the power supply in a consumer electronic device, needs to control high power devices, such as motor motors or lighting fixtures. It is also useful for distributing power to multiple devices or providing a delay on power applications. Some common applications of the 8-1393817-4 include:

• Lighting controls
• HVAC control
• Motor control
• Alarm systems
• Building control systems
• Surge protection
• Security systems
• Medical equipment
• Automotive electronics
• Industrial control systems

Working Principle of 8-1393817-4 Relays

The 8-1393817-4 signal relay operates on the electric principle of magnets generating an electrostatic force that, when connected to a power source, will cause a mechanical switch to close or open. When the relay is turned on, a magnetic field acts on the electromagnetic coil, which then attracts the armature. This in turn causes the switch contact to close and the circuit to be energized. When the relay is turned off, the armature is released and the switch contact will open, de-energizing the circuit.

The 8-1393817-4 relay is designed to operate in two distinct modes: the normally open (NO) mode and the normally closed (NC) mode. In the NO mode, the switch contact is closed when the relay coil is energized and open when the coil is de-energized. In the NC mode, the switch contact is open when the coil is energized and closed when the coil is de-energized.

Design Considerations for 8-1393817-4 Relays

When designing a system with 8-1393817-4 relays, several considerations must be taken into account in order to ensure that it operates properly and efficiently. This includes considering the current rating, contact configuration, contact material, coil voltage, and mounting method. It is important to select the right relay for a given application since the wrong relay may not provide the desired performance.

The current rating should be taken into account when selecting the relay for a given application. This should not exceed the maximum rating of the relay to ensure safe operation. The contact configuration should also be chosen based on the application, with the NO and NC modes being most common. The contact material used should also be considered, as it affects the temperature rating and electrical properties of the relay.

In addition, the coil voltage of the relay should be taken into account. This should be chosen based on the power requirements of the application. Finally, the mounting method for the relay should be selected, with most relays being designed for either panel-mounting or PCB mounting.

The 8-1393817-4 signal relay is a reliable and versatile component that can be used in a variety of applications. By keeping the above design considerations in mind, engineers and technicians can ensure that these relays are used safely and efficiently.

The specific data is subject to PDF, and the above content is for reference