8-1609095-9

Power Line Filter Modules are designed to block high frequency electromagnetic interference from entering or leaving equipment. This type of filter module is usually used to reduce EMI to the level of a product\'s specification so that its performance is not affected. 8-1609095-9 is a power line filter module that is widely used in industrial, military, aerospace and telecommunications applications.

The 8-1609095-9 power line filter is a three-stage, metal oxide varistor (MOV) line filter with a full 3-line to ground blocking frequency range of 100kHz – 30MHz. The filter is designed to reduce common and differential mode voltage transients, as well as noise from inductive loads. It has a current rating of 15A, rated voltage of 230 VAC, and a leakage current of 2mA.

The working principle of 8-1609095-9 power line filter is based on the MOV elements that are mounted on the printed circuit board. The MOV elements act as a voltage dependent resistor and are used to shunt large voltage transients to ground. The 8-1609095-9 is designed to have a high impedance at a lower frequency and gradually reduce the impedance as the frequency increases. This makes the filter extremely effective in blocking high frequency noise from entering or leaving the equipment.

Apart from the industrial, military, aerospace and telecommunications applications, 8-1609095-9 power line filter can also be used in applications such as LED lighting, switch mode power supplies, medical equipment and other EMI sensitive equipments. The 8-1609095-9 power line filter is extremely useful in protecting sensitive equipment from voltage transients and noise caused by external or internal interference.

The 8-1609095-9 power line filter is designed to provide an effective level of protection and is suitable for a wide range of applications. Its high performance and low cost make it an attractive option for those seeking to protect their equipment from the damaging effects of EMI.