8102801EA

Data Rate:	10MBd
Supplier Device Package:	16-DIP
Package / Case:	16-DIP (0.300", 7.62mm)
Mounting Type:	Through Hole
Operating Temperature:	-55°C ~ 125°C
Voltage - Supply:	4.5 V ~ 5.5 V
Current - DC Forward (If) (Max):	20mA
Voltage - Forward (Vf) (Typ):	1.55V
Rise / Fall Time (Typ):	35ns, 35ns
Propagation Delay tpLH / tpHL (Max):	100ns, 100ns
Series:	--
Current - Output / Channel:	25mA
Output Type:	Open Collector, Schottky Clamped
Input Type:	DC
Common Mode Transient Immunity (Min):	1kV/µs
Voltage - Isolation:	1500VDC
Inputs - Side 1/Side 2:	2/0
Number of Channels:	2
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Optoisolators – Logic Output devices are used to isolate two electronic subsystems in a circuit. These devices use light as a signal carrier and can thus provide high isolation and excellent signal integrity. A key type of optoisolator is the 8102801EA, which is a logic output optocoupler. This device can be used in a variety of applications due to its high isolation, low power consumption, and low component count. In this article, we will discuss the applications of the 8102801EA, its working principle, and its advantages. Applications of the 8102801EA

The 8102801EA is a logic output optocoupler that can be used in many applications. It is commonly used for isolating digital communications, such as I2C, CAN, and RS-485. It can also be used in power supplies for isolating inputs and protecting devices from transient voltage spikes and electrostatic discharge (ESD). The 8102801EA can also be used in motor controllers and as an interface between a PLC and a serial port.Working Principle of the 8102801EA

The 8102801EA is a logic output optocoupler that uses a light emitting diode (LED) as the input signal and a phototransistor as the output. The LED is connected to an input signal via an electrically insulated path. The input signal is then converted into light, which is then received by the phototransistor. The phototransistor then converts the light into an output voltage, which is then sent to the output signal. The device has high isolation, up to 4.0kV, and can operate at temperatures up to 105°C. Advantages of the 8102801EA

The 8102801EA has several advantages. One of the main advantages is that it is a low-cost device with a low component count. It also has excellent noise isolation and can operate at high frequencies. In addition, the device has high isolation and can be used in high temperature applications. Furthermore, it has low power consumption and is thus ideal for battery-powered applications. Conclusion

The 8102801EA is a logic output optocoupler that has become popular in a variety of applications. It has excellent signal integrity, high isolation, and low power consumption. In addition, it has a low component count and is suitable for battery-powered applications. The 8102801EA is thus suitable for use in digital communications, power supplies, motor controllers, and PLC interfaces.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description