8102801TA

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A logic output optoisolator, also known as 8102801TA, is a type of optoelectronic device which provides a means to electrically isolate two circuits while transferring digital information between them. This optoisolator is designed especially for monitoring logic and digital signals such as TTL, flip-flop, CMOS, or logic gate outputs. The design of the device includes an infrared-emitting diode (LED) located in the input side of the isolator and an amplified phototransistor in the output side of the device.

An 8102801TA optoisolator is typically used for two primary applications. The first application is to isolate a potentially harmful source, such as a high-voltage power supply, from a lower voltage device. The device can provide isolation between the source and the load, protecting the load from hazardous voltages and from the control signals of the device. The second application is to provide noise immunity when transferring digital signals between systems. The optoisolator is designed to prevent electromagnetic interference (EMI) from affecting digital signals.

At the input side, the 8102801TA optoisolator consists of an LED which is triggered by a logic or power signal. When the logic signal is high, the LED is activated and generates an optical signal, which covers a wide wavelength between 680 nanometers and 840 nanometers. The optics generated by the LED are received by the phototransistor in the output side of the optoisolator, and the phototransistor translates the optical signal to an electrical signal. This electrical signal is then further amplified by the output-side circuitry. The output is a straight-ahead TTL-compatible level, which can be either 0V or 5V depending on the state of the input side.

The 8102801TA optoisolator has two main features: high speed operation and high isolation voltage. The device has a typical switching speed of 100 nanoseconds and a typical isolation voltage of up to 4kV. This high speed switching can be useful in applications where digital data needs to be transferred in high speed, and the high insulation voltage can be used in applications where the input and output can have a large voltage difference and need to be adequately insulated.

One important feature of the 8102801TA optoisolator is its ability to reject high-frequency noise from the input side of the device. The output side of the device is designed to prevent EMI from interfering with the output signal. In addition, the device is also designed to be resistant to short-circuit conditions, power supply transients, and voltage spikes, which makes it a suitable choice for use in rugged applications or industrial applications.

The 8102801TA optoisolator is a useful device for a variety of applications since it offers complete electrical isolation while transferring digital signals between systems. This type of device can be used to protect low-voltage devices from high-voltage sources, and it can also be used to provide protection from EMI disturbances. In addition, the device is designed for use in high-speed digital systems and has a high isolation voltage rating, making it ideal for industrial applications.

The specific data is subject to PDF, and the above content is for reference