831-83-004-20-001101

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Rectangular Connectors - Headers, Receptacles, Female Sockets are commonly used in electronics to connect two items. The 831-83-004-20-001101 is designed for the purpose of connecting devices such as two integrated circuit chips, or an integrated circuit chip to a different electronic component. This type of connector is part of the rectangular header family and is designed to fit into a standard .1 (2.54 mm) pitch female socket similar to that found on many motherboards.

The 831-83-004-20-001101 connectors have two metal pins, one on either side of the overall contact. The two side pins both have a flat metal contact area, which is used to make the connection to the device being connected. The two side pins are connected by two metal springs, which allows the pins to pivot in either direction, allowing the pins to make a connection regardless of how the pieces are positioned.

If the main contact is pushed in, then the two side contacts are pulled together, allowing an electrical connection between the two. This type of header can also be inserted one way, ensuring that the connection is not made incorrectly. The other type is different in that the main contact has a central ridge that prevents the header from being inserted in the wrong direction.

An important factor with the 831-83-004-20-001101 connectors is the type of termination used. Depending on the application, the termination can either be solder, crimp or even press-fit. Different types of termination will require different levels of care and attention, and it is important to ensure that the termination is correct in order to make a reliable connection.

Depending on the application, the 831-83-004-20-001101 connector can be used to connect two integrated circuit chips, or an integrated circuit chip to another electronic component. The two possible orientations add further use cases, as the header can be mounted in either vertical or horizontal position. For instance, if the application was a flat printed circuit board, then the 831-83-004-20-001101 connector could be used to connect two chips side-by-side, or else to connect two chips at perpendicular angles.

When selecting a header, it is important to make sure that the contact strength is sufficient for the application. It is also important to select a header that is designed to fit the socket of the device being connected. Sockets for IC chips are often genderless, but depending on the application, a female receptacle could be required.

In summary, the 831-83-004-20-001101 is a two pin rectangular header which can be used for a range of applications, such as connecting two integrated circuit chips, or a chip to another electronic component. This type of header is designed to fit a standard .1 (2.54 mm) pitch female socket. Different types of termination can be used, such as solder, crimp or press-fit, and the header can be inserted one way, ensuring that a connection is not made incorrectly.

The specific data is subject to PDF, and the above content is for reference