875105544003 Capacitors

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum - Polymer capacitors are a type of capacitor that use both aluminum and polymer materials in the construction of their capacitance. They typically possess higher dielectric strength and lower ESR than their ceramic or film based counterparts.

The 875105544003 aluminum-polymer capacitors are part of a family of capacitors developed by Murata as part of their generic capacitor lineup. They are an SMD style capacitor, meaning that they are much smaller than traditional capacitor designs and are used mainly in surface mount applications.

The 875105544003 aluminum-polymer capacitor is a 7mm x 10mm x 10mm SMT capacitor. It is rated at 63V and has a capacitance of 4700µF. It has a maximum ripple current rating of 1.75A and its operating temperature range is -55℃ to +125℃.

The 875105544003 aluminum-polymer capacitor has a wide range of applications. These may include use as part of a power supply system, for suppression or as part of an audio circuit.

The basic operating principle of an aluminum-polymer capacitor is based on the use of two electrodes, a dielectric layer, and an electrolyte. This combination allows the capacitor to take the energy they receive in the form of a charge, store it temporarily, and then release the energy back to the circuit as required.

The two electrodes are coated with an extremely thin layer of dielectric material, typically polymethylimide or polyethylene oxide. The thickness of the dielectric layer is usually a few Ångstroms, or 10−10 m. At this thickness, the electrical density of the dielectric material is very high, allowing for a very large capacitance.

The electrolyte, which is typically a ceramic material, is placed between the two electrodes. It forms the medium through which the boundary charges move from the negative electrode to the positive electrode, thus causing the electrical field within the capacitor. When a voltage is applied, the charge will move from the negative electrode to the positive electrode until it reaches equilibrium.

The 875105544003 aluminum-polymer capacitor is a widely used and versatile device that is relatively easy to manufacture and cost effective. Its wide range of applications, low cost, and ease of use make it suitable for many applications.

The specific data is subject to PDF, and the above content is for reference