8N3DV85AC-0143CDI8

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Programmable Timers and Oscillators

Programmable timers and oscillators are electronic components, which are influenced by input signals, have varying output signals such as a digital signal or an analog signal. 8N3DV85AC-0143CDI8 particular type of programmable timer and oscillator is a clock, which allows the user to select a set frequency or range of frequencies in order to produce a digital clock signal or oscillations of a particular frequency or range of frequencies. The 8N3DV85AC-0143CDI8 programmable timer and oscillator can also be used as a frequency or phase comparator, in order to measure and/or compare a particular frequency or phase shift.

Application Field of 8N3DV85AC-0143CDI8

The 8N3DV85AC-0143CDI8 programmable timer and oscillator is suitable for controlling both low and high frequency signals. The high frequency signal applications range from cellular phones, CD players and other related applications to wireless communication systems. It can also be used for low frequency applications such as control systems and communication systems. Additionally, its versatile design is also suitable for many test and measurement applications.

Working Principle of 8N3DV85AC-0143CDI8

The 8N3DV85AC-0143CDI8 programmable timer and oscillator use a programmable timer that can be configured to operate in either a monostable (one-shot) or astable (continuous) mode. In the monostable mode, the oscillator will only produce a single pulse or pulse train when triggered by an input signal. Conversely, in the astable mode, the oscillator continuously outputs a pulse train. The frequency can be changed by altering the parameters set by the user, such as the duty cycle and active time.

In addition to the monostable and astable modes of operation, the 8N3DV85AC-0143CDI8 programmable timer and oscillator can also be configured to operate in slew rate mode, in which a linear sweep of frequencies is produced. The frequency can be changed by altering the slew rate, which is the rate of change of frequency with time. Oscillators in slew rate mode are used to control the frequency of RF and other signals over a specified period.

The 8N3DV85AC-0143CDI8 programmable timer and oscillator can also be used in frequency-hopping applications, which are used in many wireless devices to reduce the likelihood of interference. In this mode, the programmed clock will continuously generate a series of random or pseudo-random pulses of different frequencies. The pulses will switch between these different frequencies, thereby creating an ever-changing signal which helps to reduce the chances of interference between different wireless devices.

Conclusion

The 8N3DV85AC-0143CDI8 programmable timer and oscillator offers a versatile range of timing and frequency control applications. It can be used for low and high frequencies, for monostable, astable, and slew rate operation, and for frequency-hopping applications. Furthermore, its programming parameters can be easily adjusted to enable the device to meet the needs of any specific application.

The specific data is subject to PDF, and the above content is for reference