8N3DV85EC-0148CDI8

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Programmable timers and oscillators constitute a category of electronic devices that are used to regulate timing intervals and frequencies. 8N3DV85EC-0148CDI8 is an example of such a device, combining the benefits of both a timer and an oscillator into a single package. Along with its relatively small size and low power consumption, this type of programmable timer and oscillator is often used in motion control and communications applications.

The 8N3DV85EC-0148CDI8 is a typical programmable timer and oscillator that can be used to generate frequencies anywhere from 0.1 Hz to 1.5 MHz. It is a standard 8-pin device, employing a voltage control oscillator (VCO) and a phase frequency detector (PFD). The device utilizes external resistors and capacitors to set the desired frequency range. It also includes a control (CTRL) pin, which serves as an input to select either the timer or oscillator function.

When set to the timer function, the 8N3DV85EC-0148CDI8 can act as either a single-shot or a programmable timer. In single-shot mode, the timer output is set by the RC timing elements, thus resulting in a constant pulse width. The programmable timer mode is more flexible as it allows the user to adjust the pulse duration to meet their specific requirements. The timer output is triggered by an external voltage control signal.

In oscillator mode, the 8N3DV85EC-0148CDI8 works by utilizing an internal voltage control oscillator (VCO) to generate a sinusoidal waveform. This waveform is then fed onto the phase frequency detector (PFD), which extract the frequency information from it. The VCO\'s frequency is then adjusted depending on the frequency range set by the RC elements. The output from the oscillator consists of a sinusoidal waveform with a frequency of up to 1.5 MHz.

The 8N3DV85EC-0148CDI8 is a versatile device and can be used in a variety of applications, including motion control, communications, and test and measurement. In motion control, the device can be used to generate an exact pulse repetition rate required to move a motor or servo in a precise pattern. In communications, the 8N3DV85EC-0148CDI8 can be used to generate a steady clock signal which is required by many communication protocols. In test and measurement, the timer and oscillator functions can be used to measure frequency and pulse width of signals.

In summary, 8N3DV85EC-0148CDI8 is a versatile programmable timer and oscillator that can be used to achieve precise timing for various applications. It offers both a timer and oscillator function, allowing users to select the best suited mode for their specific requirements. The relatively small size, low power consumption and versatile nature of this device make it a popular choice for many applications.

The specific data is subject to PDF, and the above content is for reference