8N3DV85FC-0026CDI8

A clock generator or oscillator is any device that produces a regular periodic signal, typically a square wave, on an output pin. The 8N3DV85FC-0026CDI8 is a programmable timer and oscillator device. It is used to generate clock and timing signals that are used to time digital logic and microcontroller systems, calibrate oscillators and frequency counters, and synchronize data transfers.

Application Field

The 8N3DV85FC-0026CDI8 is a versatile tool used in a variety of applications, ranging from electronic test and measurement to communication systems. This device is used in many different industries, including aerospace, industrial, automotive, and telecommunications. It is used in systems requiring precise timing and accuracy in order to perform their tasks correctly and efficiently.

The 8N3DV85FC-0026CDI8 can be used to generate clock signals for microcontrollers, such as microprocessors in cellular phones. It is also used in LCD display panels, to synchronize the timing of the signals that drive the LCD pixels. In addition, it is used in RF systems for clocks and for power line communications, as well as in personal computers for system clocks and for timing of data transfers.

The 8N3DV85FC-0026CDI8 is also used in medical systems, such as pacemakers and cardiac monitoring systems, to control the timing of the pulses and adjust the frequency with which they are emitted. It is also used in automobile engine controllers, to control the timing of the spark plugs and valves.

Working Principle

The 8N3DV85FC-0026CDI8 programmable timer and oscillator works by generating a digital clock signal according to the user-defined configuration. This is done by a voltage-controlled oscillator (VCO), which is a device that produces an output signal that is proportional to the input voltage. The VCO is connected to an array of digital logic components, such as counters, registers, and delay elements, which control the frequency and timing of the output clock signal.

The 8N3DV85FC-0026CDI8 is programmed using a serial interface, allowing the user to configure the device when it is installed in the target system. It is also possible to use the device in an analog configuration, by connecting it to an analog to digital converter (ADC), but this requires more complex programming and configuration.

The 8N3DV85FC-0026CDI8 has a wide operating temperature range and can operate with a supply voltage of 3.3V - 5V. It is available in both surface mount and through-hole packages.

The 8N3DV85FC-0026CDI8 programmable timer and oscillator is a versatile and extremely accurate device that can be used in a wide variety of applications requiring precise timing and synchronization. It is used in a variety of industries, ranging from telecommunications to medical systems, for clock generation and data transfer purposes.