8N3Q001EG-1098CDI8

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Clock/Timing - Programmable Timers and Oscillators has become indispensable to modern electronic devices, from computers and telecommunications to consumer electronics. The 8N3Q001EG-1098CDI8 is a handy programmable timer/oscillator, which is relatively easy to use compared to other forms of programmable timers and oscillators. This article will discuss the 8N3Q001EG-1098CDI8 application field and working principle.

The 8N3Q001EG-1098CDI8 is a versatile programmable timer/oscillator. It offers up to four programmable outputs, with a frequency range of 0.1 Hz to 10 MHz. It has a simple three-button operation and can be connected to a PC or other device through a serial port. It also has an adjustable dwell time, which allows users to vary the output frequency of their device.

The 8N3Q001EG-1098CDI8 can be used in a wide number of applications, such as general timers, LED lighting systems, clock oscillators, audio frequency oscillators, and frequency synthesizers. It has a relatively low power consumption, and its output signals can be precisely controlled. Its adjustable dwell time allows for finely tuned synchronization with other components. This feature makes the 8N3Q001EG-1098CDI8 ideal for use in sophisticated systems.

The 8N3Q001EG-1098CDI8 works on the principle of a crystal oscillator. The circuit contains a crystal, typically quartz, which vibrates when a voltage is applied to it. The frequency of the vibration is determined by the frequency of the applied voltage. The vibration then creates a series of pulses, with the pulses as the output signal. This can be used to control other components, or it can be used to create a sound when connected to a speaker.

The 8N3Q001EG-1098CDI8 also uses resistors and capacitors to form a timing circuit. This timing circuit produces an output frequency depending on the ratio of the resistor to capacitor values. When the frequency is set, the timer/oscillator can be programmed to maintain that frequency for selected time slots. In other words, the user can design their own timers, oscillators, and synthesizers using the 8N3Q001EG-1098CDI8.

In short, the 8N3Q001EG-1098CDI8 is a versatile programmable timer/oscillator. It utilizes the principles of a crystal oscillator to find applications across a wide variety of devices. Its adjustable dwell time makes it perfect for synchronizing other components, or creating precise sound or lighting sequences. Its ease of use and adjustable frequency make it perfect for any project.

The specific data is subject to PDF, and the above content is for reference