8N3Q001FG-0018CDI

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

8N3Q001FG-0018CDI is a programmable timer and oscillator belonging to the Clock/Timing family. It is primarily used for frequency synthesis, control and automatic operation. It is able to provide frequency outputs from 0.1Hz to 52MHz, pulse width from 200ns to 20ms, pulse frequency from 0.2Hz to 25kHz, and pulse duration and pulse count from .1ms to 32s and 1 to 4,999, respectively.

It is designed to support a wide range of applications such as frequency control, automatic control, intermittent operation, constant speed operation, count operation, and reset operation. To achieve this, it incorporates the following resources:

• DDA (Direct Digital Frequency Divider): The DDA provides frequency synthesis of 1 Hz to 25 counter frequency and maximum of 52MHz output frequency. It also provides a variety of clock and pulse waveforms with low distortion and good step response.
• DIP (Dynamic Interval Pulse) Generator: The DIP generator provides pulse width, frequency, and count outputs. It supports pulse width, pulse frequency, pulse duration, and pulse count.
• SDC (Synchronous DIverter / Clock Source): The SDC provides clock signals with frequency range from 0.2Hz to 25kHz. It also provides pulse width from 200ns to 20ms and pulse duration from .1ms to 32s.
• DRC (Digital Reset Controller): The DRC detects input pulses and provides output pulses when input frequency, pulse width, and pulse duration is detected.

The 8N3Q001FG-0018CDI is equipped with a variety of generic digital interfaces such as UART, I2C, SPI, etc. The interface can be used to communicate with external devices and system components.

The 8N3Q001FG-0018CDI also supports various industrial protocols, such CAN BUS, Profibus, etc. These protocols allow the device to be used in various industrial control systems.

The 8N3Q001FG-0018CDI is compliant with various industrial standards for safety and electromagnetic compatibility. In addition, it comes with an advanced protection system to ensure the safety of your device and systems.

The 8N3Q001FG-0018CDI is a programmable timer and oscillator that provides frequency synthesis, control, and automatic operation for various applications. The device is equipped with a variety of generic digital interfaces as well as industrial protocols for use in various industrial control systems. The device is compliant with various industrial standards for safety and electromagnetic compatibility, and provides an advanced protection system.

The specific data is subject to PDF, and the above content is for reference