Clock/Timing - Programmable Timers and Oscillators

The 8N3Q001LG-0168CDI is an optically isolated Gate Driver Integrated Circuit (GDIC) used in Programmable Timers and Oscillators. It is programmable for various calibration parameters which enable it to operate under a wide range of input-voltage and ambient-temperature conditions.

The 8N3Q001LG-0168CDI provides two levels of differential drive with two-level protection. The two level output keeps a low operating power consumption at idle state and assists in the efficiency of the whole system once the timer and oscillator are in operation. Its highly integrated design makes the 8N3Q001LG-0168CDI a very successful solution for both Timers and Oscillators projects.

Application

The 8N3Q001LG-0168CDI is intended as a driver for Gate arrays and Programmable Timers and Oscillators. It can be used to drive most transistors, FETs, and SCRs. The 8N3Q001LG-0168CDI has the ability to drive a wide variety of low-voltage bearing devices, enabling its use in a variety of applications.

• Automation
• Industrial Controls
• Robotics
• Test and Measurement
• Medical Equipment

Working Principle

The 8N3Q001LG-0168CDI works by sensing the incoming voltage from the Gate array and generating a switching signal to the output driver. The switch signal is then applied to the output, creating a two level output with two levels of protection. The two level output protects the device from damage due to overloads and excessive temperatures.

The 8N3Q001LG-0168CDI also contains a programmable set of parameters that can be used to calibrate the device to function in different input-voltage and ambient-temperature ranges. Once programmed, the 8N3Q001LG-0168CDI will operate correctly within the specified range.

The 8N3Q001LG-0168CDI also features an active-gating function that will switch off the output if the input voltage is below a certain level. This feature helps to conserve power and protect the device from damage in the event of a power outage.

Conclusion

The 8N3Q001LG-0168CDI is an opto-isolated gate driver integrated circuit (GDIC) used in Programmable Timers and Oscillators. It provides two levels of differential drive for two levels of protection and is programmable for various calibration parameters. The 8N3Q001LG-0168CDI is a highly integrated and successful solution for Timers and Oscillators projects, and is suitable for a variety of applications.