8N3Q001LG-2163CDI

The 8N3Q001LG-2163CDI is a high-performance, reliable programmable timer and oscillator with a wide range of applications and various ways to configure it. This timer and oscillator can be applied to time-delayed events, pulse counting, pulse width modulation, frequency measurement, and other applications. With its simple design and low power consumption, it is suitable for various industrial, automotive, consumer, and medical equipment.

The 8N3Q001LG-2163CDI has three main components: a programmable timer, a trigger delay circuit, and an oscillator circuit. The programmable timer is designed to generate the correct internal timing signals for the trigger delay circuity and oscillator circuit. It consists of an adjustable counter circuit and a programmable logic array (PLA) to provide the full range of timing functions. The trigger delay circuit is adjustable and provides a delay action before the start of the timer. The oscillator circuit allows the device to generate precise frequencies accurately. The timing signals generated by the programmable timer, delay timer, and oscillator circuit can be used to trigger events and control settings.

The programmable timer on the 8N3Q001LG-2163CDI can be used to set the number of clock cycles or the length of the time delay before the timer starts. The delay can be set between 1 ms and 8 seconds. The PLA offers a variety of different timing functions such as one-shot, Pulse-Width Modulation (PWM), Monostable, and Astable. These configurations can be defined according to the application requirement. The user can also select the input clock frequency to enable precise counting of events.

The trigger delay circuit on the 8N3Q001LG-2163CDI can be used to switch between two settings based on an external voltage input. This allows the user to program the device to switch between a low and a high output accordingly. The user can select any of the available voltages as the input and set a delay time before the triggering occurs. This provides a more precise control over system timing and settings.

The oscillator circuit on the 8N3Q001LG-2163CDI can be configured to generate square waves, triangular waves, and sine waves of different frequencies. The frequency of the output waveforms can be adjusted using the onboard trimming potentiometer, with an accuracy of up to 0.2%. The same potentiometer can also be used to select the frequency range for the signal. The device offers a wide frequency range from 0.2 Hz to 60 MHz.

The 8N3Q001LG-2163CDI can be used in many applications in industrial automation, automotive, consumer, and medical applications. It is suitable for use in motor controllers, servo motors, pulse generation and counting, frequency measurement, reversing switching, temperature control, and AC phase control applications. The device also provides a simple, low power consumption, reliable, and accurate way to time-delay events and control setting. All of these functions make the 8N3Q001LG-2163CDI a versatile programmable timer and oscillator.