8N3SV75AC-0052CDI

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Clock/Timing - Programmable Timers and Oscillators

The 8N3SV75AC-0052CDI is an electronically tunable crystal oscillator, using a filter network to tune the output frequency by varying the amplitude of the supply voltage. The chip is used in a variety of applications, such as radio frequency (RF) systems, telecoms, factory automation, automotive applications, and instrumentation.

Working Principle

The oscillator is an active circuit using a dual active filter architecture. The filter includes two voltage-controlled resistors, each having its own active component, and a programmable output circuit with a power amplifier. These components drive an adjustable crystal, or crystals, to produce a fixed, continuous output frequency.

The primary component of a programmable crystal oscillator is the crystal, usually a quartz crystal. The crystal is composed of two electrodes that form a capacitor and the quartz crystal attached between them. By varying the voltage across the crystal, the frequency of the output is tuned. The crystal is connected in series with a filter circuit, which is composed of two identical frequency-selective and voltage-controlled resistor networks. The filter circuit produces an output frequency that is dependent on the voltage across the crystal.

The 8N3SV75AC-0052CDI further includes a programmable output circuit and a power amplifier, which can be used to fine-tune the output frequency by varying the amplitude of the supplied voltage. The amplifier is configured to provide a constant-amplitude, high-frequency sine wave output, allowing the crystal to be tuned to a wide range of frequencies.

Applications

The 8N3SV75AC-0052CDI is used in a variety of applications, such as radio frequency (RF) systems, telecoms, factory automation, automotive applications, and instrumentation.

In RF systems, the filter network and power amplifier of the 8N3SV75AC-0052CDI can be used to tune a quartz crystal for accurate, stable, and low noise output. The crystal can be tuned to a wide range of frequencies, allowing for a greater range of applications.

In telecoms, the oscillator is used in network timing applications, where it must be tuned to a specific frequency, such as 2.4 GHz, for efficient transmission of data.

In factory automation and automotive applications, the 8N3SV75AC-0052CDI is used in precision sensors, such as those used in speed measuring systems, as well as in position and motion sensing.

In instrumentation, the oscillator can be used for timing applications, where accuracy and stability are of paramount importance.

Conclusion

The 8N3SV75AC-0052CDI is a programmable crystal oscillator that is suitable for use in a variety of applications, such as radio frequency (RF) systems, telecoms, factory automation, automotive applications, and instrumentation. The chip includes a filter network that can be used to tune the output frequency by varying the amplitude of the supply voltage. The power amplifier can also be used to fine-tune the output frequency.

The specific data is subject to PDF, and the above content is for reference