8N3SV75BC-0173CDI8

Series:	FemtoClock® NG
Packaging:	Tape & Reel (TR)
Part Status:	Active
Type:	VCXO
Count:	--
Frequency:	156.2523MHz
Voltage - Supply:	2.375 V ~ 2.625 V
Current - Supply:	120mA
Operating Temperature:	-40°C ~ 85°C
Package / Case:	6-CLCC
Supplier Device Package:	6-CLCC (7x5)
Mounting Type:	Surface Mount
Base Part Number:	IDT8N3SV75BC

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Programmable Timers and Oscillators

• Application Field of 8N3SV75BC-0173CDI8
• Working Principle of 8N3SV75BC-0173CDI8

Introduction

Programmable Timers and Oscillators are electronic components that provide timing signals and control functions for controlling various electronic operations. They are used in systems such as computers, robotics, manufacturing, consumer and industrial products, and communications. 8N3SV75BC-0173CDI8 is one of the family of programmable timers and oscillators which manufactured by the CTS Corporation.

Application Field of 8N3SV75BC-0173CDI8

8N3SV75BC-0173CDI8 is designed as an 8-bit programmable timer/oscillator with an integrated mini-USB controller to enable remote programming of the device. It is suitable for applications such as system synchronization and delay generation. It can also be used for precision measurement and data acquisition. With the integrated mini-USB controller, it is easy to control and configure the device over the USB interface. It is also ideal for applications such as system control, data conversion, and instrumentation.

Working Principle of 8N3SV75BC-0173CDI8

The 8N3SV75BC-0173CDI8 is a programmable timer/oscillator that includes a variable duty cycle clock generator, an 8-bit counter, a modulus counter, and an 8-bit digital control interface. The device is controlled by a set of configurable registers that set the clock frequency, the operating mode, and the duty cycle of the output signal. The output signal itself is a square wave, with a variable high and low time depending on the setting of the duty cycle.The working principle of the device is based on the principle of frequency division. The frequency of the output signal is determined by dividing the frequency of the input clock signal. The division ratio is controlled by setting the modulus register which is responsible for setting the division ratio. The duty cycle of the output signal is controlled by setting the duty-cycle register. This register controls the length of the high and low times of the output signal relative to the input clock signal.

Conclusion

In conclusion, 8N3SV75BC-0173CDI8 is a programmable timer/oscillator that can be used for applications such as system synchronization, delay generation, precision measurement, data acquisition, and instrumentation. It works on the principle of frequency division and can be remote controlled via a mini-USB controller. It is an ideal device for a variety of applications requiring a reliable timing device.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description