8N3SV75FC-0037CDI

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Programmable Timers and Oscillators are one of the most versatile components used in the manufacture of electronic devices. A Programmable Timer is a specialized electronic circuit that generates a finite set of regularly repeating electrical pulses at predetermined intervals, while an Oscillator is a general-purpose and continuously variable integrated circuit that produces electrical output pulses with selectable frequency, duty cycle, and other characteristics. The 8N3SV75FC-0037CDI, manufactured by Data Delay Devices, Inc., is a high-speed Programmable Timer/Oscillator with a relatively low power consumption.

The 8N3SV75FC-0037CDI is a versatile Programmable Timer/Oscillator, combining the features of a Programmable Timer and an Oscillator into a single device. It is designed to generate programmable, fixed-frequency bi-level pulses from a single input signal or from an externally driven oscillator circuit. The 8N3SV75FC-0037CDI is available in a through-hole DIP (Dual In-Line Package) or a surface-mount chip. The device has a maximum input frequency of 10 MHz and its maximum output frequency is 1.5 MHz. The on-board timer is powered by an onboard clock, while the oscillator is powered by an external oscillator.

The 8N3SV75FC-0037CDI is suitable for applications such as clock switching, frequency division, and signal synthesis. It is also suitable for use in frequency counting applications and data transmission. The device is well suited for applications that require high speed, low power, and high accuracy.

The 8N3SV75FC-0037CDI contains two programmable counters, one for the external oscillator and one for the internal timer. Each counter has a range of 0 to 255. The device also features an input selector that allows the user to select either the internal timer or the external oscillator as the source for the timer/oscillator.

In addition, the 8N3SV75FC-0037CDI contains two trigger modes. The first mode is a single-edge trigger, which is used when the input signal is an external oscillator. This mode allows the 8N3SV75FC-0037CDI to be triggered by an external signal in order to generate a fixed frequency output. The second mode is a dual-edge trigger, which is used when the input signal is an internal timer. This mode allows the 8N3SV75FC-0037CDI to be triggered by an internal signal in order to generate a varying frequency output.

In its most basic form, the 8N3SV75FC-0037CDI is used to generate regular clock signals for microcontroller-based applications. It is also often used in communication systems, such as in the generation of programmed stop/start signals or in the timing of the various parts of a transmission protocol. In short, the 8N3SV75FC-0037CDI is a versatile Programmable Timer/Oscillator that can be used in a wide variety of applications.

The specific data is subject to PDF, and the above content is for reference