8N3SV75FC-0112CDI

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Clock/Timing - Programmable Timers and Oscillators

The 8N3SV75FC-0112CDI is a programmable timer/oscillator with high stability performance in severe temperature environments. It features a clock/timing circuit that is built into the device, which can be tuned for specific performance requirements. It is suitable for a variety of applications, such as in GPS systems, clock/timing modules, and other embedded systems.

The 8N3SV75FC-0112CDI is designed to allow the user to adjust the frequency, tuning range, and the frequency stability. It has a wide tuning range, with a low limit of 1MHz and a high limit of 150MHz. It also has a temperature stability range of ±100ppm over the full -40°C to +85°C temperature range. It can be used across a wide voltage range, from 2.7V to 5.5V.

The 8N3SV75FC-0112CDI features a wide variety of programmable features. These features include programmable clock outputs, programmable frequency accuracy, programmable frequency adjustment, programmable output drive strength, programmable ramp rate and slope characteristics, programmable slew rate, programmable fractional divider, programmable noise immunity, and programmable power management mode. All of these programmable features can be adjusted through the 8N3SV75FC-0112CDI Controller Software.

The 8N3SV75FC-0112CDI’s working principle is relatively simple. It works by adjusting the frequency of an oscillator that is supplied by an external clock. The clock frequency is adjusted by varying the voltage of the external clock. This voltage can be adjusted by the 8N3SV75FC-0112CDI controller software. Once the frequency has been set, the 8N3SV75FC-0112CDI will then automatically adjust the frequency with environmental conditions. This allows for high accuracy and stability of the 8N3SV75FC-0112CDI in a wide range of applications.

The 8N3SV75FC-0112CDI also features a variety of operating modes, depending on the specific application. These operating modes include normal, low power, and high-speed modes. In normal mode, the 8N3SV75FC-0112CDI will consume a low amount of power and will maintain a moderate frequency stability. In low power mode, the device will consume a minimal amount of power and will maintain a higher frequency stability. In high-speed mode, the device will offer high frequency stability and consume a significant amount of power.

In summary, the 8N3SV75FC-0112CDI is a programmable timer/oscillator with excellent performance in severe temperature environments. It features a wide range of programmable features and operating modes which can be adjusted according to specific performance requirements. It is suitable for a variety of applications such as in GPS systems, clock/timing modules, and other embedded systems. The 8N3SV75FC-0112CDI’s working principle is relatively straightforward, and its performance is exceptionally stable, robust, and accurate.

The specific data is subject to PDF, and the above content is for reference